User's Manual

© 2014 Bendix Commercial Vehicle Systems LLC, a member of the Knorr-Bremse Group • 1/14 • All Rights Reserved.
Bulletin No: PNU-186 Effective Date: January 13, 2014 Cancels: NA Page: 2 of 2
Section B — New Bendix
®
Versajust
®
LS
™
Slack Adjusters WITHOUT Yokes
These are for use with welded clevis chambers with 1.3 inch pin-to-pin spacing.
1.3 inches
1.3 inches
Bendix Versajust LS Slack
Adjuster - No Yoke Version
Welded Clevis Chamber
New OE Bendix Versajust LS Slack Adjusters WITHOUT Yokes:
Arm
Length
Bendix
®
Versajust
®
LS
™
OE Part Number
Camshaft Spline
(Diameter - Teeth)
Lube
Fitting
5.0"
K096191
1.25" - 24
0°
K096196 45°
K096193 90°
K096194 1.50" - 10 45°
K096192
1.50" - 28
0°
K096195 45°
5.5"
K041480
1.25" - 10
0°
K047163 90°
K047160
1.50" - 10
0°
K047161 45°
K041479 90°
K046808
1.50" - 28
0°
K046804 45°
K041743 90°
6.0"
K043149
1.50" - 10
0°
K047206 45°
K041477 90°
K047204
1.50" - 28
0°
K047205 45°
K041478 90°
Log-on and Learn from the Best
On-line training that's available when you are 24/7/365.
Visit www.brake-school.com.
Reference Document:
The Service Data Sheet for the Bendix
®
Versajust
®
LS
™
slack adjuster
with the WearMax
™
Clutch is SD-05-4630. This document is available
for download from the Bendix Document Library at www.bendix.com,
or may be ordered from the Marketing Center.
For more information contact your Bendix Account Manager or Plant at
1-800-AIR-BRAKE (1-800-247-2725).
Bendix
®
Versajust
®
LS
™
Slack
Adjuster - No Yoke Version
Welded Clevis Chamber