User's Manual

21
Table of Diagnostic Trouble Codes (DTCs), Causes and Recommended Actions for FLR20 Radars
DTC SPN FMI Description
Go to the Service
Action Code List
in Table 6B
140 886 14 J1939 Signal Error: Error in EEC1 engine speed N
141 886 14 J1939 Signal Error: Not available EEC1 engine speed O
142 886 14 J1939 Signal Error: Invalid EEC1 driver torque P
143 886 14 J1939 Signal Error: Error in EEC1 driver torque N
144 886 14 J1939 Signal Error: Not available EEC1 driver torque O
145 886 14 J1939 Signal Error: Invalid EEC1 actual torque P
146 886 14 J1939 Signal Error: Error in EEC1 actual torque N
147 886 14 J1939 Signal Error: Not available EEC1 actual torque O
148 886 14 J1939 Signal Error: Invalid EEC2 accelerator pedal position P
149 886 14 J1939 Signal Error: Error in EEC2 accelerator pedal position N
150 886 14 J1939 Signal Error: Not available EEC2 accelerator pedal position O
158 886 14 J1939 Signal Error:
Error in VDC1 Roll Over Protection (ROP) brake contro lN
159 886 14 J1939 Signal Error: Not available VDC1 ROP brake control O
160 886 14 J1939 Signal Error: Error in VDC1 ROP engine control N
161 886 14 J1939 Signal Error: Not available VDC1 ROP engine control O
162 886 14 J1939 Signal Error: Error in VDC1 YC brake control N
163 886 14 J1939 Signal Error: Not available VDC1 yaw control (YC) brake control O
164 886 14 J1939 Signal Error: Error in VDC1 YC engine control N
165 886 14 J1939 Signal Error: Not available VDC1 YC engine control O
166 886 14 J1939 Signal Error: Invalid VDC2 steer angle P
167 886 14 J1939 Signal Error: Error in VDC2 Steer Angle Sensor (SAS) N
168 886 14 J1939 Signal Error: Not available VDC2 steer angle O
169 886 14 J1939 Signal Error: Invalid VDC2 yaw rate P
170 886 14 J1939 Signal Error: Error in VDC2 yaw rate N
171 886 14 J1939 Signal Error: Not available VDC2 yaw rate O
172 886 14 J1939 Signal Error: Invalid VDC2 long acceleration P
173 886 14 J1939 Signal Error: Error in VDC2 long acceleration P
174 886 14 J1939 Signal Error: Not available VDC2 long acceleration O
175 886 14 J1939 Signal Error: Invalid TSC1 requested torque limit P
176 886 14 J1939 Signal Error: Error in TSC1 requested torque limit N
177 886 14 J1939 Signal Error: Not available TSC1 requested torque limit O
178 886 17 Wingman antenna dirty or partially blocked C
179 886 14 Vehicle cruise control and ACC out of sync K
181 886 14 J1939 Signal Error: EBC1 ABS not fully operational R
182 886 14 J1939 Signal Error: VDC1 VDC not fully operational S
183 886 14 J1939 Signal Error: Error in VDC1 VDC fully operational N
184 886 14 J1939 Signal Error: Not available VDC1 VDC fully operational O
185 886 14 ABS tire size needs recalibration using Bendix
®
ACom
®
Diagnostics T
186 886 14 Internal radar sensor error A
187 898 13 J1939 Signal Error: Error in ACC1 ACC mode N
188 898 13 J1939 Signal Error: Not available ACC1 ACC mode O
189 898 13
J1939 Signal CCVS3: Engine not properly confi gured for Wingman Advanced G
190-193 886 14 Internal radar sensor error A
TABLE 6A - REFER TO COLUMN ONE FOR EACH DTC CODE FOUND AND FIND ITS SERVICE ACTION CODE.