User's Manual

35
UHB800-CAM
General Information:
· All Cam Lengths (“A” Dim.) Are Measured From Under Cam Head to Beginning of Lock Ring Groove.
· Use Camshaft Repair Kit: 43-7059
Spicer No. Replaces A Dim. B Dim.
18-902 RH Meritor / Rockwell 2210-C-6503 7 1/8" 1 13/16"
Meritor / Rockwell 2210-P-6724
18-903 LH Meritor / Rockwell 2210-B-6502
Meritor / Rockwell 2210-N-6722
18-904 RH Meritor / Rockwell 2210-J-6484 7 23/32" 1 13/16"
Meritor / Rockwell 2210-R-6726
Euclid E-9714
18-905 LH Meritor / Rockwell 2210-H-6482
Meritor / Rockwell 2210-Q-6725
Euclid E-9713
18-906 RH Meritor / Rockwell 2210-F-6740 9 5/16" 1 13/16"
Meritor / Rockwell 2210-S-6493
Euclid E-9716
18-907 LH Meritor / Rockwell 2210-E-6739
Meritor / Rockwell 2210-R-6492
Euclid E-9715
18-908 RH Meritor / Rockwell 2210-Q-6543 9 15/16" 1 13/16"
Meritor / Rockwell 2210-R-6752
Euclid E-9718
18-909 LH Meritor / Rockwell 2210-P-6542
Meritor / Rockwell 2210-Q-6751
Euclid E-9717
STEER AXLE S-CAMSHAFTS
Rockwell “Q” 15" x 4" Brake 2" Offset Backing Plate
1 1/4" Diameter At Spider 1 1/4" - 24 Spline
1 1/16"
NOTE: "Q Plus" cams can be used to replace the standard "Q" cams. However, a "Q" cam cannot be
used to replace a "Q Plus" cam.