User's Manual

51
UHB800-CAM
DRIVE AXLE S-CAMSHAFTS
Rockwell 16 1/2" Brake
1 1/2" Diameter At Spider 1 1/2" - 10 Spline
1 1/2"
General Information:
· All Cam Lengths (“A” Dim.) Are Measured From Under Cam Head to Beginning of Lock Ring Groove.
· Use Camshaft Repair Kit:
43-7047
43-7048A (Bushing and Seal Kit)
43-7034 (Short Kit - Minus Camshaft Lockring, Camshaft Washer and Anchor Pin Washer)
Spicer No. Replaces A Dim. B Dim.
18-792 RH Meritor / Rockwell 2210-V-4910 5 3/32" 1 3/4"
18-793 LH Meritor / Rockwell 2210-U-4909
18-800 RH Meritor / Rockwell 2210-A-5721 6 3/8" 1 3/4"
Meritor / Rockwell 2210-Y-3067
Euclid E-4704A
18-801 LH Meritor / Rockwell 2210-B-5722
Meritor / Rockwell 2210-X-3066
Euclid E-4705A
18-802 RH Meritor / Rockwell 2210-H-3024 7 7/8" 1 3/4"
Meritor / Rockwell 2210-W-5717
Euclid E-4706A
18-803 LH Meritor / Rockwell 2210-J-3026
Meritor / Rockwell 2210-X-5718
Euclid E-4707A
18-854 RH Meritor / Rockwell 2210-E-4477 8 1/16" 1 3/4"
Meritor / Rockwell 2210-E-5543
Euclid E-5056
18-855 LH Meritor / Rockwell 2210-F-4478
Meritor / Rockwell 2210-F-5544
Euclid E-5057
18-804 RH Meritor / Rockwell 2210-W-5639 8 9/16" 1 3/4"
Meritor / Rockwell 2210-X-2442
Euclid E-2478A
18-805 LH Meritor / Rockwell 2210-X-5640
Meritor / Rockwell 2210-Y-2443
Euclid E-2479A
18-794 RH Meritor / Rockwell 2210-G-5545 9 3/32" 1 3/4"
Euclid E-9688
18-795 LH Meritor / Rockwell 2210-H-5546
Euclid E-9687
18-782 RH Meritor / Rockwell 2210-Q-5737 9 31/64" 1 3/4"
Meritor / Rockwell 2210-V-3740
18-783 LH Meritor / Rockwell 2210-R-5738
Meritor / Rockwell 2210-Y-3739
Continued Next Page