User's Manual

52
UHB800-CAM
DRIVE AXLE S-CAMSHAFTS
Rockwell 16 1/2" Brake
1 1/2" Diameter At Spider 1 1/2" - 10 Spline
1 1/2"
General Information:
· All Cam Lengths (“A” Dim.) Are Measured From Under Cam Head to Beginning of Lock Ring Groove.
· Use Camshaft Repair Kit:
43-7047
43-7048A (Bushing and Seal Kit)
43-7034 (Short Kit - Minus Camshaft Lockring, Camshaft Washer and Anchor Pin Washer)
Spicer No. Replaces A Dim. B Dim.
18-784 RH Euclid E-1788 10 1/4" 1 3/4"
Meritor / Rockwell R607017
18-785 LH Euclid E-1789
Meritor / Rockwell R607018
18-806 RH Meritor / Rockwell 2210-B-3226 10 9/16" 1 3/4"
Meritor / Rockwell 2210-D-7180
Meritor / Rockwell 2210-S-5375
Meritor / Rockwell 2210-Y-5381
Euclid E-2700A
18-807 LH Meritor / Rockwell 2210-A-3225
Meritor / Rockwell 2210-E-7181
Meritor / Rockwell 2210-T-5376
Meritor / Rockwell 2210-Z-5382
Euclid E-2701A
18-808 RH Meritor / Rockwell 2210-K-3027 11 9/32" 1 3/4"
Meritor / Rockwell 2210-V-5222
Meritor / Rockwell 2210-W-5353
Meritor / Rockwell 2210-Y-5355
Euclid E-1773B
18-809 LH Meritor / Rockwell 2210-L-3028
Meritor / Rockwell 2210-X-5221
Meritor / Rockwell 2210-X-5354
Meritor / Rockwell 2210-Z-5356
Euclid E-1774B
18-810 RH Meritor / Rockwell 2210-C-5359 11 1/2" 1 3/4"
Meritor / Rockwell 2210-K-5185
Meritor / Rockwell 2210-Q-2981
Euclid E-1147B
18-811 LH Meritor / Rockwell 2210-D-5360
Meritor / Rockwell 2210-L-5186
Meritor / Rockwell 2210-P-2980
Euclid E-1148B
Continued Next Page
(Continued)