User's Manual

53
UHB800-CAM
X
DRIVE AXLE S-CAMSHAFTS
Rockwell 16 1/2" Brake
1 1/2" Diameter At Spider 1 1/2" - 10 Spline
1 1/2"
General Information:
· All Cam Lengths (“A” Dim.) Are Measured From Under Cam Head to Beginning of Lock Ring Groove.
· Use Camshaft Repair Kit:
43-7047
43-7048A (Bushing and Seal Kit)
43-7034 (Short Kit - Minus Camshaft Lockring, Camshaft Washer and Anchor Pin Washer)
Spicer No. Replaces A Dim. B Dim.
18-786 RH Meritor / Rockwell 2210-E-3047 11 3/4" 1 3/4"
Meritor / Rockwell 2210-Y-5719
Euclid E-4702A
18-787 LH Meritor / Rockwell 2210-D-3046
Meritor / Rockwell 2210-Z-5720
Euclid E-4703A
18-852 RH Meritor / Rockwell 2210-C-3097 12 1/16" 1 3/4"
Meritor / Rockwell 2210-E-5725
Euclid E-2714A
18-853 LH Meritor / Rockwell 2210-D-3098
Meritor / Rockwell 2210-F-5726
Euclid E-4715A
18-812 RH Meritor / Rockwell 2210-A-5357 12 1/2" 1 3/4"
Meritor / Rockwell 2210-F-5310
Meritor / Rockwell 2210-M-2405
Meritor / Rockwell 2210-R-5010
Euclid E-4708A
18-813 LH Meritor / Rockwell 2210-B-5358
Meritor / Rockwell 2210-E-5309
Meritor / Rockwell 2210-L-2404
Meritor / Rockwell 2210-Q-5009
Euclid E-4709A
18-814 RH Meritor / Rockwell 2210-F-5050 13" 1 3/4"
Meritor / Rockwell 2210-M-5421
18-815 LH Meritor / Rockwell 2210-E-5049
Meritor / Rockwell 2210-N-5422
18-724 RH Meritor / Rockwell 2210-W-5379 13 21/32" 1 3/4"
Euclid E-9690
18-725 LH Meritor / Rockwell 2210-X-5380
Euclid E-9689
Continued Next Page
(Continued)