User's Manual

55
UHB800-CAM
DRIVE AXLE S-CAMSHAFTS
Rockwell 16 1/2" Brake
1 1/2" Diameter At Spider 1 1/2" - 28 Spline
1 1/4"
General Information:
· All Cam Lengths (“A” Dim.) Are Measured From Under Cam Head to Beginning of Lock Ring Groove.
· Use Camshaft Repair Kit:
43-7048
43-7048A (Bushings and Seal Kit)
Spicer No. Replaces A Dim. B Dim.
18-796 RH Meritor / Rockwell 2210-R-5166 7 23/32" 1 3/4"
Meritor / Rockwell 2210-W-5457
Meritor / Rockwell 2210-Z-7124
18-797 LH Meritor / Rockwell 2210-A-7125
Meritor / Rockwell 2210-S-5167
Meritor / Rockwell 2210-X-5458
18-860 RH Meritor / Rockwell 2210-G-5337 8 1/8" 1 3/4"
Meritor / Rockwell 2210-Q-5139
Euclid E-5000
18-861 LH Meritor / Rockwell 2210-H-5338
Meritor / Rockwell 2210-R-5140
Euclid E-4999
18-824 RH Meritor / Rockwell 2210-A-5123 8 17/32" 1 3/4"
Meritor / Rockwell 2210-E-5439
Euclid E-4897
18-825 LH Meritor / Rockwell 2210-B-5124
Meritor / Rockwell 2210-F-5440
Euclid E-4896
18-850 RH Meritor / Rockwell 2210-L-5160 9 1/16" 1 3/4"
Meritor / Rockwell 2210-U-5455
Euclid E-4899
18-851 LH Meritor / Rockwell 2210-M-5161
Meritor / Rockwell 2210-V-5456
Euclid E-4898
18-862 RH Meritor / Rockwell 2210-Q-5373 9 1/4" 1 3/4"
Meritor / Rockwell 2210-R-5088
18-863 LH Meritor / Rockwell 2210-R-5374
Meritor / Rockwell 2210-S-5089
18-864 RH Meritor / Rockwell 2210-S-5427 9 1/2" 1 3/4"
Meritor / Rockwell 2210-X-5094
Euclid E-4724
18-865 LH Meritor / Rockwell 2210-T-5428
Meritor / Rockwell 2210-Y-5095
Euclid E-4725
Continued Next Page