User's Manual

UHB800-CAM

DRIVE AXLE S-CAMSHAFTS

Rockwell 16 1/2" Brake “Q Plus” Brake

1 1/2" Diameter At Spider 1 1/2" - 28 Spline

1 1/4"

General Information:

· All Cam Lengths (“A” Dim.) Are Measured From Under Cam Head to Beginning of Lock Ring Groove.

· Use Camshaft Repair Kit:

43-7048

43-7048A (Bushings and Seal Kit)

Spicer No. Replaces A Dim. B Dim.

18-500 RH Meritor / Rockwell 2210-K-7395 7 23/32" 1 13/16"

Euclid E-9646

18-501 LH Meritor / Rockwell 2210-L-7396

Euclid E-9645

18-502 RH Meritor / Rockwell 2210-X-7408 8 1/16" 1 13/16"

Euclid E-9648

18-503 LH Meritor / Rockwell 2210-Y-7409

Euclid E-9647

18-504 RH Meritor / Rockwell 2210-P-7426 8 9/16" 1 13/16"

Euclid E-9650

18-505 LH Meritor / Rockwell 2210-Q-7427

Euclid E-9649

18-506 RH Meritor / Rockwell 2210-F-7442 9 1/16" 1 13/16"

Euclid E-9652

18-507 LH Meritor / Rockwell 2210-G-7443

Euclid E-9651

18-508 RH Meritor / Rockwell 2210-T-7456 9 7/16" 1 13/16"

Euclid E-9654

18-509 LH Meritor / Rockwell 2210-U-7457

Euclid E-9653

18-930 RH Meritor / Rockwell 2210-C-6607 10 3/16" 1 13/16"

Meritor / Rockwell 2210-H-6820

Meritor / Rockwell 2210-T-7482

Meritor / Rockwell 2210-V-7484

Euclid E-5505

18-931 LH Meritor / Rockwell 2210-D-6608

Meritor / Rockwell 2210-J-6822

Meritor / Rockwell 2210-U-7483

Meritor / Rockwell 2210-U-7485

Euclid E-5504

NOTE: "Q Plus" cams can be used to replace the standard "Q" cams. However, a "Q" cam cannot be

used to replace a "Q Plus" cam.

Continued Next Page