User's Manual

60
UHB800-CAM
DRIVE AXLE S-CAMSHAFTS
Rockwell 16 1/2" Brake “Q Plus” Brake
1 1/2" Diameter At Spider 1 1/2" - 28 Spline
1 1/4"
General Information:
· All Cam Lengths (“A” Dim.) Are Measured From Under Cam Head to Beginning of Lock Ring Groove.
· Use Camshaft Repair Kit:
43-7048
43-7048A (Bushings and Seal Kit)
Spicer No. Replaces A Dim. B Dim.
18-510 RH Meritor / Rockwell 2210-D-7492 10 13/32" 1 13/16"
Euclid E-9656
18-511 LH Meritor / Rockwell 2210-E-7493
Euclid E-9655
18-512 RH Meritor / Rockwell 2210-K-7499 10 1/2" 1 13/16"
18-513 LH Meritor / Rockwell 2210-L-7500
18-514 RH Meritor / Rockwell 2210-Z-7514 10 15/16" 1 13/16"
Euclid E-9658
18-515 LH Meritor / Rockwell 2210-A-7515
Euclid E-9657
18-516 RH Meritor / Rockwell 2210-H-7522 11 1/8" 1 13/16"
Euclid E-9660
18-517 LH Meritor / Rockwell 2210-J-7524
Euclid E-9659
18-518 RH Meritor / Rockwell 2210-V-7536 11 9/16" 1 13/16"
Euclid E-9662
18-519 LH Meritor / Rockwell 2210-W-7537
Euclid E-9661
18-520 RH Meritor / Rockwell 2210-B-7542 11 11/16" 1 13/16"
Euclid E-9664
18-521 LH Meritor / Rockwell 2210-C-7543
Euclid E-9663
18-522 RH Meritor / Rockwell 2210-K-7551 11 15/16" 1 13/16"
Euclid E-9666
18-523 LH Meritor / Rockwell 2210-L-7552
Euclid E-9665
18-524 RH Meritor / Rockwell 2210-B-7568 12 7/16" 1 13/16"
Euclid E-9668
18-525 LH Meritor / Rockwell 2210-C-7569
Euclid E-9667
NOTE: "Q Plus" cams can be used to replace the standard "Q" cams. However, a "Q" cam cannot be
used to replace a "Q Plus" cam.
Continued Next Page
(Continued)