Owner`s manual

CHANNELSCAN
Press the SCN button to start or stop scanning channels in the scan list. Scan
operation occurs only while the radio is not transmitting. Scan operation is
indicated on the display by the flashing SCN annunciator (alphanumeric
mode) or two flashing bars (numeric mode).
The radio scans all channels in the scan list for activity. When activity is detected,
the radio receives the active channel, and the channel name or number
appears on the display.
Channels in the scan list are pre-programmed. To determine which channels
are in the scan list, select a channel with the channel knob. If it is in the scan list
the SCN annunciator appears in the display.
To add or delete the current channel from the scan list, press the SCN button and
hold it down for 1 second or more. A beep sounds when the scan list change is
executed.
PRIORITYSCAN
10 RELM/BK Radio