Owner`s manual

KEYPAD MICROPHONE OPERATION
If a keypad microphone is used with the EMH radio, the following features
may be enabled. Not all microphones support these functions. Contact
your dealer to determine which features are available with your microphone
and have been enabled in the radio.
GROUP SELECTION
Select a channel group by pressing the # key on the keypad microphone
followed by the number of the desired group. This is used only if the radio has
been programmed to divide the available channels into groups.
DTMF ENCODE
DTMF Encode (telephone touch tone) is accomplished by pressing and
holding the keypad microphone PTT switch, and then pressing the 0 - 9 keys
for the encoding operation desired. After the desired numbers have been
entered, monitor or transmit as required.
ANI OPERATION
Automatic Number Identification can be programmed into the EMH radiofor
use with inter-connect telephone and other systems requiring users to identify
before allowing use of the system.
USER SELECTED SCAN LIST
Press the ENT button on the keypad microphone to add the selected channel to
the scan list. The SCN annunciator appears on the display for each channel
entered in the scan list. Press the CLR button on the keypad microphone to
remove (clear) the selected channel from the scan list. This can be
accomplished during Channel Scan operation to remove an unwanted
channel.
8 RELM/BK Radio