Product Manual

8. Slide lift head back towards the base plate. Ensure the lift

head chain is properly positioned with the lift head chain sheave.

(See Fig 3.11) Failure to properly align lift head chain and/or

cylinder will result in lift malfunction.

9. Ensure the hydraulic cylinder is properly seated in cylinder

ring and that the cylinder leveling plug is installed properly. (See

Fig 3.12) Failure to properly align lift head chain and/or cylinder

will result in lift malfunction.

9. Uncoil cable and route cable around the Top Plate

sheave and coil the remaining cable up and leave it in the

post above the lift head. (See Fig 3.13)

OPTIONAL SHEAVE COVER

INSTALLATION INSTRUCTIONS

To install optional sheave covers, rst t sheaves over

sheave shafts. Then t sheave cover over both sheave

shaft ends. Ensure the notched face of the sheave

cover faces the base plate. Secure sheave cover by

inserting cotter pins through the cotter pin holes in the

sheave shaft.

Sheave

Cover

Sheave

Shaft

Sheave

Fig 3.10

M10 Bolt

M10 Spring

Lock Washer

M10 Nut

Fig 3.13

Fig 3.11

NOTE: Portions of post cut away for clarity

NOTE:

ENSURE CYLINDER LEVELING PLUG IS ALSO

INSTALLED PROPERLY WHEN CHECKING

ALIGNMENT OF CYLINDER AND CYLINDER RING

Fig 3.12

NOTE: Portions of post, lift head, and cylinder

cut away for clarity.

Cylinder Ring

Cylinder Leveling Plug

Cylinder

Fig 3.14

NOTE: Post hidden for clarity