Product Manual

4. Each arm restraint gear can be oriented in a Left

or Right conguration on the arms. Each arm and arm

restraint gear must be positioned in the proper location in

the lift head. (See Fig. 12.4 & 12.5)

5. Place each Gear Ring against the Lift Head Pin and

align the holes in the Gear Ring with the threaded holes

in the Arm Ears. Ensure that the teeth on the Gear Ring

mesh smoothly with the teeth on the gears of the Lift

Head. (See Fig. 12.6)

NOTE:

LEFT AND RIGHT ARE DETERMINED WHEN FACING

THE INSIDE. OPEN SIDE OF THE LIFT POST.

THE ARM RESTRAINT GEARS MUST BE

POSITIONED AND ADJUSTED PROPERLY.

CONFIRMATION OF PROPER GEAR

ENGAGEMENT MUST BE MADE PRIOR TO THE

OPERATION OF THE LIFT. PERIODIC INSPECTION

AND ADJUSTMENT IS REQUIRED.

FAILURE TO INSPECT AND ADJUST THE ARM

RESTRAINT GEARS ON ALL FOUR ARMS PROPERLY

CAN RESULT IN DAMAGE TO THE VEHICLE OR

INJURY AND/OR DEATH.

Fig. 12.4

LEFT RIGHT

Lift Head

Snap

Ring

Snap

Ring

Lift Head

Fig. 12.1

Fig. 12.2

Lift Head

Snap

Ring

NOTE: Arm gears rings have

Left and Right orientations

Fig. 12.5

Approach

XPR-9S: Medium Arm

Assembly

XPR-9TS: Triple Telescoping

Arm Assembly

XPR-9S/TS: Triple Telescoping

Arm Assembly

Fig 12.3