User's Manual

TOOLS
52
Note that you cannot create second-level folders,
i.e. folders inside the folders in phone memory.
Additionally you cannot delete the phone´s own
applications and folders, only the folders you
have created.
Selecting display settings
You can adjust brightness, set lights and info line
and select startup effects and wallpaper. Make
the adjustments and press
. Save .
• Brightness : You can adjust the brightness of
the display with a 5-level indicator.
• Color theme : You can select the color theme for
the basic elements of the display.
• Wallpaper : You can set a picture to be shown
as the background picture in stand-by mode.
If the original picture in the picture list is
deleted, the wallpaper reflection will be lost
and replaced by the default wallpaper. If you
clear the wallpaper, it will be replaced by the
default wallpaper.
• Startup effects : You can set a greeting text or
picture that is shown when the phone starts
up. Write the greeting text or select the pic
-
ture from the picture list.
• Indicator led : You can select, whether the indi-
cator LED is blinking or not. If the LED is set
on, the blinking will be shown when the dis
-
play is darkened, i.e. backlight is off.
• Lights : You can set display and keypad back-
lights separately. Automatic light setting
means that the lights will turn off automati
-
cally if no keys are pressed during a few sec-
onds.
• Info line : You can select, whether you wish the
cell ID or date to be shown in the stand-by
mode.
Setting date and time
You can set date and time and the way they will
be displayed. These settings are used on stand-
by mode and in clock settings, as well.
• Time source : You can set the time manually or
let the GPS calculate it from satellites. Press
n left/right to select the desired option. If
GPS is set for the time source, make sure to
adjust time zone, as well.
• Time : If User defined is set for time source,
press
", then key in the valid time. Press .
Save . Note that changing time zone will
change the time even if
User defined is
selected so you may have to define the valid