User's Manual

TOOLS
65
• Automatic answer : You can set the phone so
that it turns the automatic answer on or off
each time when an accessory is attached to
the phone. This setting can be defined sepa
-
rately for each of the accessories.
RESTORE DEFAULTS
You can restore settings to their default values
set in the factory.
Key in the phone lock code and press
. Ok .
Restoring does not affect creations of your own.
Sound profiles, GPS profiles, SMS profiles, mail-
boxes and connections which you have created
yourself will not be deleted.
Network services
Select Network and press ".
The application consists of the following main
folders:
Call diverts , Call barrings , Call waiting , Re-
veal own number
, Service command , Networks .
CALL DIVERTS
You can divert calls to another number or a voice
mailbox. You can set the terms or circumstances
under which the calls will be diverted: E.g. all
calls, if the line is busy, if unanswered, or if not
reachable. You can also clear all diverts at once.
You can also set divert for selected service, e.g.
voice calls, data calls, or fax calls, or specify time
delay for divert option
If unanswered .
To check the divert status, press
. Check .
To set, check or clear the divert, press
". Com-
plete the setting by pressing
. Send . You can
also make call diversion for selected service only,
e.g. voice calls, data calls or fax calls.
To cancel the operation and return to the previous
view, press
- Back .
CALL BARRINGS
You can set call barrings. You can bar all outgoing
calls, outgoing international calls, outgoing inter-
national calls except calls to your home country,
all incoming calls, or incoming calls when roam-
ing. You can also clear all barrings or change the
network code. For changing the code you must
key in the old code, the new code and then con-
firm the new code.
To check the barring status, press
. Check .