User Manual

10
3) Carefully release cocking lever and close the
bolt (fig. 31).
4) Remove the cartridges from the magazine
(fig. 32) by pushing them forwards and fit the
empty magazine back in.
Stripping of the rifle
(for maintenance and cleaning)
Before beginning any operation on your rifle,
always make sure that chamber and magazine
have been completely emptied!
(Carefully read loading and unloading instruc-
tions).
Stripping procedure
1) Open the bolt (fig. 19).
2) Unscrew fore-end cap completely (fig. 33)
and slide off the fore-end (fig. 34).
3) Fully unscrew the barrel locking cap (fig. 35),
using the sling-swivel pin of the assembly, if
necessary.
4) Close the bolt back up by pressing in the bolt
lever (fig. 16) and remove the barrel-assembly
(fig. 36).
31
32
36
34
35
33