User Manual

5) Assemble the drop shim “8” that you have

selected onto the recoil spring tube with the

stamped letter facing the stock.

6) Reassemble the selected cast shim “7” with

the stamped letter (DX or SX) facing toward

the stock.

7) Point the barrel towards the floor and fit the

stock. Engage the stock locking plate “5” in

the stock with the side punched with the

chosen letter facing the butt plate.

8) Fit the rubber washer “4” then screw the

nut “3” on to the end of the recoil spring

tube. Tighten the nut securely.

9) (Progressive Comfort stock only) fit the com-

fort kit “2” inside the stock and secure it with

its two screws using a Phillips screwdriver.

10) Fit the butt plate “1” and secure it with its

two screws using a Phillips screwdriver.

Having altered the stock drop of your rifle, you

have also obviously altered the firing position as

well: it is therefore necessary that you first prac-

tice by executing some shots in order to make

sure that the firing position is suitable to your

size and shooting style.

WARNING: on completion of the drop change,

check that the stock is securely fixed to the recei-

ver. Check again after firing the first few rounds

and, if necessary, re-tighten the nut with a suit-

able wrench to fix the stock securely in place.

23459

678

1 3 4 5 6