User Manual

WARNING: use enough force when screwing on
the cap to overcome the contrast of the spring
stopping the barrel, until the cap is fully against
the cylinder guide pin.
8) Slide the fore-end back on (fig. 14) and screw
the fore-end cap back in (fig. 15).
9) Close the bolt by pulling it back and pressing
the no load lever (fig. 16).
You have now finished assembling your rifle.
Use
Before beginning any operation on your rifle,
always make sure that chamber and magazine
have been completely emptied!
(Carefully read loading and unloading instruc-
tions).
Rifle safety catch
Press the safety button on the trigger guard until
its red ring, indicating firing position, is no
longer visible (figs. 17-18).
7
13
14
16
15
17
18