Manual

24
7) Prendere il cappellotto fissaggio astina ed avvitarlo completamen-
te sull'estremità del tubo serbatoio (fig. 13), serrando con una cer-
ta energia fino a bloccare perfettamente il gruppo canna-fodero
contro la carcassa (fig. 12).
8) Inserire a fondo la manetta di armamento nel corpo otturatore
(fig. 14).
9) Chiudere l’otturatore dell’arma premendo l’apposito bottone
comando elevatore (fig. 15).
13
7) Screw the fore-end cap all the way onto the end of the tubular
magazine (fig. 13). Fasten it tightly so that the barrel-cover unit is
firmly seated against the receiver (fig. 12).
8) Insert completely the bolt handle into the breech bolt unit (fig.
14).
9) Close the bolt by pressing the special carrier control button (fig.
15).
14