Manual

62
ATTENZIONE: la linea di riferimento marcata sull'estremità del perno
deve essere in vista e allineata con l'asse longitudinale del gruppo
otturatore (fig. 47).
7) Inserire il percussore con la sua molla nel foro nell’otturatore (fig.
48).
ATTENZIONE: accertarsi di aver montato sempre la molla del per-
cussore.
8) Inserire il perno arresto percussore nel suo foro, in modo che
blocchi il percussore (fig. 49).
48
NOTE: the reference line on top of the pin must be visible and
aligned with the bolt’s centerline (fig. 47).
7) Insert the firing pin and the firing pin spring inside the bolt (fig.
48).
NOTE: always make sure that the firing pin has been inserted together
with its spring.
8) Insert the firing pin retaining pin in its seat, so as to block the fir-
ing pin (fig. 49).