LiDAR Level Gauge Application

Application Overview
Benewake LiDAR installed on the top of silo, down face to the materials to detect the distance.
The measured distance information will reflect the material allowance in real time or on demand.
When over or lower the limited height, it will trigger the alarm system. Benewake LiDAR level
sensor provide real-time inventory for farmers and feed suppliers, which is convenient for timely
supply, reasonable transportation route and feed production plan.
LiDAR is a non-contact, based on Time of Flight principle measurement equipment. Single beam
of light can be used for point level detection in bins, silos and hoppers filled with grain or other
solid materials.
Customer Benefits
LiDAR Level Gauge Advantages
量程
Product
Range
0.1
-
12m@90%reflectivity
0.1-4m@10%reflectivity
0.1
-
25m@90%reflectivity
0.1
-
12m@10%reflectivity
0.1
-
180/100m@90%reflectivity
0.1-70/40m@10%reflectivity
Accuracy
±5cm@(0.1-5m)
±1%@(5-12m)
≤6cm@(0.1-5m)
≤1%@(5-25m)
±10cm@(within 10m)
1%@(more than 10m)
FoV 3.6° 3° 0.5°
Interface UART、I²C、I/O UART、I²C UART、CAN、I/O
RS484、RS585
Power ≤0.55W ≤1W ≤0.9W
Frequency
1-1000Hz 1-1000Hz 1-1000Hz
Protection
IP65 IP5X IP67
Volume 35mm*18.5mm*21mm
( L*W*H )
85mm*59mm*43mm
( L*W*H )
44mm*43mm*32mm
( L*W*H )
Performance
It help you manage your inventory. No
manual check level work required (0-
300m). It will enhance safety for staff and
reduce labor cost.
LiDAR Level Gauge Application
It will alert automatically when material
reaches a particular level. Then 40m range
LiDAR’s retail price is less than 80USD. Only
1/3 price of other level sensor.
It provide an accurate distance with small
spot. The installation is flexible and simple
because of the small volume. Only 1/3
volume of other level sensor.
The power consumption is generally lower
than 1W,. It will save energy and power.
TFmini-Plus TF02 Pro-W Dust Remove
TF03 Series
For more details, please visit en.benewake.com