Owners Manual Owner's manual

550 Jim Moran Blvd.

Deerfield Beach, FL 33442

BENNETT MARINE, INC

Phone: 954-427-1400

Fax: 954-480-2897

Email: TrimTabs@Earthlink.com

Web Site: BennettTrimTabs.com

BENNETT 5 YEAR LIMITED

WARRANTY

If any part of a Bennett Trim Tab system fails

due to manufacturing defects or workmanship

within a period of five (5) years, it will be repaired or

replaced without charge. No labor costs of replacement,

haul-out, or miscellaneous charges are covered. The

foregoing is in lieu of any and all other warranties,

expressed or implied, including any warranty of

merchantability or fitness for a particular purpose. There are

no other warranties which extend beyond that set forth

above. Please Note: Contacting Bennett Marine first may

save considerable time, trouble and expense.

Warranty Return Procedure: Remove faulty part and

return to Bennett Marine. No pre-authorization is required.

Parts covered under warranty will be repaired or replaced

without charge. If necessary, a replacement part can be

sent in advance of the faulty part’s return. If Hydraulic Power

Unit is being returned, drain fluid before shipping. Please

insert a note in the box explaining the problem with a

return address. IF YOU HAVE ANY QUESTIONS,

PLEASE CONTACT BENNETT MARINE CUSTOMER

Owner’s Manual

BENNETT MARINE, INC

(keep with boat owner’s information)

Create PDF files without this message by purchasing novaPDF printer (http://www.novapdf.com)

PAGE 1
BENNETT 5 YEAR LIMITED WARRANTY If any part of a Bennett Trim Tab system fails due to manufacturing defects or workmanship within a period of five (5) years, it will be repaired or replaced without charge. No labor costs of replacement, haul-out, or miscellaneous charges are covered. The foregoing is in lieu of any and all other warranties, expressed or implied, including any warranty of merchantability or fitness for a particular purpose.
PAGE 2
Trouble Shooting Bennett Trim Tabs are built to rigid quality standards. However, the marine environment is harsh. So, in the unlikely event a malfunction occurs, here is some helpful information: 1. If trim tab does nothing . . . no movement . . . no sound from HPU: • Inspect for blown 20 amp in-line fuse in helm control’s orange wire. • Inspect for disconnected or corroded connections on HPU ground wire, orange positive wire from helm control, and quick-disconnect plug. 2.
PAGE 3
14 Diagram # Description Part # T112520 15 Hydraulic tubing (20’ unless otherwise specified) Tube bending clip 18 Upper hinge A1103 19 #14 x 1-1/2” screw H1174 20 Cylinder body A1105 21 Piston with o-ring A1109 22 Lower hinge pin A1115 23 Lower hinge A1113 25 Backing plate varies with size 27 Hinge plate varies with size 28 #10 x 1-1/4” screw EH1071 29 Trim tab only varies with size H1173 1 Fluid reservoir VP1139 30 1/4 - 20 x 3/4” machine screw H1175 2 #10 x 1”