Operation Manual

09/ 2013 BENNING CM 3

11
Operating Manual
BENNING CM 3
Digital current clamp meter for
- AC current measurement
- DC current measurement
Index of Contents
1. Operating instructions
2. Safety instructions
3. Contents of delivery
4. Meter description
5. General Specications
6. Environmental Conditions
7. Electrical Specications
8. Measuring with BENNING CM 3
9. Maintenance
10. Environmental notice
1. Operating Instructions
This operating manual is intended for
- electrical professionals
  qualiedelectrotechnicalpersons
The BENNING CM 3 is designed for measuring in dry conditions. It must not be
used on electrical circuits with a rated voltage greater than 600V (for details refer
to „Environmental Conditions“ section).
The following symbols appear in this manual and on the BENNING CM 3:
Application around and removal from HAZARDOUS LIVE conduc-
tors is permitted.

This symbol indicates dangerous voltage.

This symbol indicates warnings and cautions to be observed when
using the BENNING CM 3 (refer to manual!).

This symbol on the BENNING CM 3 indicates that the BENNING
CM 3 has double insulation (Protection Class II).
This symbol appears in the display when the battery is low.
(DC) Direct current.
(AC) Alternating current.

Ground (voltage against earth)
Note
After unmark the adhesive label „Warnung...“ (on battery compartment lid) the
English text appears.