Datasheet

3
B E N N I N G W o r l d C l a s s T e s t E q u i p m e n t
DUSPOL
®
voltage testers – the testers with the VDE mark of conformity
safe, reliable and powerful
PROFIPOL
®
Additionally for DUSPOL
®
digital:
• voltage testing up to 1000 V AC TRUE RMS/1200 V DC
• TRUE RMS measuring method
• low-volt range: 1.0 V to 11.9 V
• frequency indication up to 1000 Hz
• resistance measurement up to 300 kΩ
• conducting-state voltage measurement of diodes
• automatic LC display illumination by means of a light sensor
The new generation of DUSPOL
®
voltage testers
• safe voltage testing up to 1000 V AC/DC
• load connection with vibration alert
• intentional tripping of a 30 mA RCD
• phase sequence test in a three-phase mains
• single-pole external conductor test (phase)
Additionally for DUSPOL
®
expert, DUSPOL
®
digital:
• acoustic continuity test with loud test buzzer and visual
indication by means of yellow LED
• measuring point illumination by means of white
high-power LED
• phase sequence test by means of green LED (left/right)
• detector for non-contact localization of cable breaks on
exposed and live lines
phase-sequence test
(counter-clockwise/clockwise)
single-pole phase test:
“R” symbol for AC voltage
measuring point
illumination
acoustic and optical
continuity test
frequency indication
voltage indication
1 – 1000 V AC TRUE RMS
1 – 1200 V DC
resistance measurement and
diode test with conducting-
state voltage indication
LC display with
background lighting
sensor of non-contact
cable break detector
load connection
via push buttons
vibrating alert
in the test handle
housing with
protection against
dust and water jets
CAT IV
600 V
tested and
approved
IEC/EN 61243-3
(DIN VDE 0682-401)
:2011 standard
DUSPOL
®
analog DUSPOL
®
expert DUSPOL
®
digital PROFIPOL
®
indication plunger system (illuminated) / LED LED LED/LCD (illuminated) LED
indication steps 12 – 1000 V AC/DC 12 – 1000 V AC/DC 1.0 – 1000 V AC/1200 V DC 6 – 400 V AC/DC
frequency range – – 1 – 1000 Hz –
acoustic and visual
–
buzzer + yellow LED buzzer + yellow LED
–
continuity test 0 – 100 kΩ 0 – 100 kΩ
diode test
–
conducting-state/
0.3 – 2.0 V –
non-conducting direction
resistance measuring range – – 0.1 kΩ – 300 kΩ –
phase-sequence test LCD (“R” symbol) green LEDs (right/left) green LEDs (right/left) –
single-pole outer conductor test LCD (“R” symbol) red “lightning” LED red “lightning” LED –
polarity test LED (+/-) LED (+/-) LCD (+/-) LED (+/-)
cable break detector – yellow LED (flashing) yellow LED (flashing) –
load connection I
S
= 600 mA (1000 V) I
S
= 550 mA (1000 V) I
S
= 550 mA (1000 V)
–
via push button 30 mA RCD trip 30 mA RCD trip 30 mA RCD trip
vibrating alarm yes yes yes –
measuring point illumination – white LED white LED –
protection class IP 65 IP 65 IP 65 IP 65
item no. 050261 050262 050263 020022
Voltage and Continuity Tester