Datasheet

B E N N I N G W o r l d C l a s s T e s t E q u i p m e n t
pruefmes12s_kpl.qxd 25.06.2007 11:56 Uhr Seite 12
• continuity and semiconductor test by means of LEDs and loud
test buzzer
• visual indication by means of three LED steps:
0 to 100 Ω/1 kΩ/10 kΩ
• acoustic indication via test buzzer up to approx. 100 Ω
• external-voltage indication: 6 V to 400 V (LEDs / test buzzer)
• polarity test, single-pole external conductor test (phase) and
non-contact cable break detector
• precise and powerful LED torch
• buzzer volume and brightness of the LED torch are individual-
ly adjustable
• integrated magnetic holder and belt clip at the rear of the housing
• indication of „clockwise“ and „counter-clockwise“ phase
sequence by means of green / red LED
• indication of phase voltages L1, L2 and L3 by means of
red LED
• voltage range: 300 V to 500 V AC (50 Hz to 60 Hz)
• luminous high-power LED torch
• integrated magnetic holder and belt clip at the rear of the
housing
• including set of 4 mm test probes and alligator clip
10122825.00 GB 08/2014 www.BN-Mediendesign.de Subject to technical changes. Printed on non-chlorine bleached paper.
Technical data DUTEST
®
pro TRITEST
®
pro
LED-indication 3 x yellow, 2 x red 4 x red, 1 x green
Acoustic continuity test: loud test buzzer up to 100 Ω -
Visual continuity test (yellow LED): 0 to 100 Ω/1 kΩ/10 kΩ -
Phase sequence indication (green/red LED): - clockwise/counter-clockwise phase sequence
Voltage range: 6 V to 400 V AC/DC (50 Hz/60 Hz) 300 V to 500 V AC (50 Hz/60 Hz)
Single-pole external conductor test (phase): yes -
Polarity test (+/-): yes -
Non-contact cable break detection: yes -
Luminous LED torch: yes, adjustable to four levels yes, single-level
Magnetic suspension and belt clip yes yes
Safety: DIN EN 61010-1 DIN EN 61010-1, DIN EN 61557-7
Measuring category: CAT III 300 V CAT III 300 V
Batteries: 3 x 1.5 V batteries of type AA (LR6) 3 x 1.5 V batteries of type AA (LR6)
Scope of delivery: incl. set of measuring lines (red/black)
incl. set of measuring lines / test probes
(brown/black/green), alligator clip (black)
Item no.: 050156 020052
TRITEST
®
pro
Phase sequence indicator with high-power
LED torch and magnetic suspension
DUTEST
®
pro
Continuity and line tester for testing
high-impedance and low-impedance resistances
B E N N I N G W o r l d C l a s s T e s t E q u i p m e n t
pruefmes12s_kpl.qxd 25.06.2007 11:56 Uhr Seite 12
BENNING Elektrotechnik und Elektronik GmbH & Co. KG
Münsterstraße 135-137
• D-46397 Bocholt
www.benning.de • E-Mail: [e-mail]
Tel.: + 49 / (0) 2871 / 93-447 • Fax: + 49 / (0) 2871 / 93-429
Your specialty retailer:
Item no.: 050156
Item no.: 020052