Operation Manual
18
Resistance of auxiliary earth electrode and probe too
high.
4.1.4 Resulteld
Measurement passed.
Measurement failed.
Measurement is aborted. Check the conditions at the in-
put terminal.
4.1.5 Other messages
Instrument settings and measurement parameters/limits
are set to initial (factory) values. For more information re-
fer to chapter 4.5.4 Recalling original settings.
Probe
LUXmeter probe is turned off or disconnected from the
instrument.
First measurement Therststoredmeasurementresultisdisplayed.
Last measurement The last stored measurement result is displayed.
Memory full All memory locations are occupied.
Already saved Measurement results already saved.
CHECK SUM ERROR
Important memory contents lost or damaged. Contact
your distributor or manufacturer for further information.
4.1.6 Sound warnings
Shortest sound
Pressed key deactivated.
Sub-function is not available.
Short sound
Pressed key activated.
Measurement has been started after pressing the
TEST key. Consider any displayed warnings during
measurement.
Long sound
Measurement prohibited. Consider any displayed war-
nings and check online voltage/terminal monitor.
Periodic sound
Warning! Phase voltage on the PE terminal! Stop all the
measurements immediately and eliminate the fault before
proceeding with any activity.