Operation Manual

Step 3 Set cursor to the No. line by using the / keys set.

Fig. 6.8: Delete results menu

Use the / keys to select the function for which you want to view results. The selec-

ted measurement result is shown when the TEST key is pressed, and it is deleted when

the TEST key is pressed again. Deletion can be aborted - without deleting the selected

results - by pressing the MEM key once or several times.

How to delete saved results under the same structure item:

Step 1 To enter the Memory menu press the MEM key.

By using the / keys set cursor to DELETE RESULTS.

Press the TEST key, the following menu is displayed:

Fig. 6.9: Delete results menu

Deleting measurement results from the 3rd structure level (FUSE)

Step 2 By using the / keys set cursor to FUSE line. Use the / keys to enter the desi-

red element FUSE xx.

In No. line the number of saved results is displayed.

Fig. 6.10: Deleting results from the 3

level

Continue with instructions under Step 3.

Deleting measurement results from the 2rd structure level (BLOCK)

By using the / keys set cursor to OBJECT line. Use the / keys to enter the

desired element OBJECT xxx

In No. line the number of saved results in the 1st structure level is displayed.

Fig. 6.11: Deleting results from the 2nd level