Operation Manual

Continue with instructions under Step 3.

Deleting measurement results from the 1rd structure level (OBJECT)

By using the / keys set cursor to OBJECT line. Use the / keys to enter the

desired element OBJECT xxx

In No. line the number of saved results in the 1st structure level is displayed.

Fig. 6.12: Deleting results from the 1st level

Step 3 Use the / keys to select the function for which you want to view results. The selec-

ted measurement result is shown when the TEST key is pressed, and it is deleted when

the TEST key is pressed again. Deletion can be aborted - without deleting the selected

results - by pressing the MEM key once or several times.

How to delete all saved results:

Step 1 To enter the Memory menu press the MEM key.

By using the / keys set the cursor to CLEAR MEMORY.

Press the TEST key, the following menu is displayed:

Fig. 6.13: Clear memory menu

Step 2 Press the TEST key to clear the complete memory. Deletion can be aborted - without

deleting the selected results - by pressing the MEM key once or several times.