Siemens AG 2003, W:\ICM_MP_CCQ_S_UM\03FL00440 C61 Korrekturen von Tony\Work\Ueberarbeitung_24.11.2003\C61\US\C60_LionIVZ.fm Table of Con- Safety precautions ..................... 3 tents See also Index at the end of this User Guide Safety Information ..................... 4 Antenna care ........................... 4 Phone operation ...................... 4 Electronic devices .................... 5 SAR (Cell Phone Designation) .... 8 Phone overview ....................... 10 Display symbols (selection) ..
See also Index at the end of this User Guide Table of Contents Lists ....................................... 57 MMS Profiles .......................... 58 T9 settings ............................. 59 CB Services ............................... 60 Surf & Fun ................................ 61 Internet browser (WAP) .......... 61 Games & More ....................... 64 Setup ........................................ 67 Profiles .................................. 67 Display ..................................
Siemens AG 2003, W:\ICM_MP_CCQ_S_UM\03FL00440 C61 Korrekturen von Tony\Work\Ueberarbeitung_24.11.2003\C61\US\C60_Security.fm 3 Safety Note for parents precautions Read the operating instructions and safety precautions carefully before use. Explain to your children the contents and the hazards associated with using the phone. Do not use mobile phone in hospitals or in the vicinity of medical devices, such as pacemakers or hearing aids. Mobile phones may interfere with the operation of these devices.
Safety Information Safety Infor- Important mation Read this information before using your wireless handheld phone. As this mobile phone is equipped with a fixed (non-retractable) antenna, some paragraphs in the below text may not be applicable. Antenna care Use only the supplied or an approved replacement antenna. Unauthorized antennas, modifications, or attachments could damage the phone and may violate FCC regulations.
Siemens AG 2003, W:\ICM_MP_CCQ_S_UM\03FL00440 C61 Korrekturen von Tony\Work\Ueberarbeitung_24.11.2003\C61\US\C60_Security.fm • Pull off the road and park before making or answering a call, if driving conditions so require. For vehicles equipped with Air Bags An air bag inflates with great force. DO NOT place objects, including either installed or portable wireless equipment, in the area over the air bag or in the air bag deployment area.
Safety Information Vehicles RF signals may affect improperly installed or inadequately shielded electronic systems in motor vehicles. Check with the manufacturer or its representative regarding your vehicle. You should also consult the manufacturer of any equipment that has been added to your vehicle. Posted Facilities Turn your phone OFF in any facility where posted notices so require. Airplanes FCC and Airline Regulations prohibit using your phone while in the air.
Siemens AG 2003, W:\ICM_MP_CCQ_S_UM\03FL00440 C61 Korrekturen von Tony\Work\Ueberarbeitung_24.11.2003\C61\US\C60_Security.fm be possible on all wireless phone networks or when certain network services or phone features are in use. Check with local service providers regarding their network features. Always make certain that your phone is properly charged before attempting any emergency calls. If you allow your battery to discharge, you will be unable to receive or make calls, including emergency calls.
SAR (Cell Phone Designation) RF EXPOSURE /SPECIFIC SAR (Cell ABSORPTION RATE (SAR) Phone Designation) INFORMATION THIS SIEMENS C61 PHONE MEETS THE GOVERNMENT'S REQUIREMENTS FOR EXPOSURE TO ELECTROMAGNETIC FIELDS. Your cell phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy established by the Federal Communications Commission (FCC) of the U.S. Government and by Health Canada.
Siemens AG 2003, W:\ICM_MP_CCQ_S_UM\03FL00440 C61 Korrekturen von Tony\Work\Ueberarbeitung_24.11.2003\C61\US\C60_SAR.fm Grant section of http://www.fcc.gov/oet/fccid after searching on FCC ID PWX-C61. While there may be differences between the SAR levels of various phones and at various positions, all Siemens products meet the governmental requirements for safe RF exposure.
Phone overview Phone overview 1A Call key Dial phone number /name displayed, take calls. Show last phone numbers dialed in standby mode. 2 B On/Off/End key • Switched off: Hold down to switch on. • During a call or in use: press briefly to finish. • In menus: Press briefly: one level back. Press and hold: return to standby mode. • In standby mode: Hold down, to switch off phone. 3 Control key In lists and menus: G D C Scroll up and down. Function call. Back a menu level.
Siemens AG 2003, W:\ICM_MP_CCQ_S_UM\03FL00440 C61 Korrekturen von Tony\Work\Ueberarbeitung_24.11.2003\C61\US\C60_Overview.fm 1 Integrated antenna Do not interfere unnecessarily with the phone above the battery cover. This reduces reception quality. 2 Loudspeaker 3 Display symbols Signal strength/GPRS available/battery level. 4 Soft keys The current functions of these keys are shown in the bottom line of the display as §text§/symbol (e.g. d). 5Input keys Numbers, letters.
Display symbols (selection) Display symbols (selection) Display symbols _ Signal strength. h Charging. d Battery charging status, è Z É ç ] e.g., 50 %. Phonebook Call Log Surf & Fun Tones/Alerts Messages Camera y Ñ m n Extras Own Setup Other calls are forwarded. j Ringer off. k Short ringer (beep) only. l Ringer only, if the caller is stored in the Phonebook. Ö Alarm clock active. µ Key lock active. Q ¡ Phone numbers/names: On the SIM card On the SIM card (PIN 2 protected).
Siemens AG , W:\ICM_MP_CCQ_S_UM\03FL00440 C61 Korrekturen von Tony\Work\Ueberarbeitung_24.11.2003\C61\US\C60_DisplaySymbols.fm Soft keys … \ — – ¿ Message received. MMS received. MMS notification. Voice mail received. Data received. Picture received. Melody received. Missed Calls. Store in Phonebook. · Retrieve from Phonebook.
Getting started Getting started The front and back covers of the casing, as well as the keypad can be changed in a matter of seconds – no tools required (CLIPit™, p. 96). Please switch the phone off first: Assembling 1 2 3 5 6 Dismantling 4 Additional notes Your phone's display is delivered with a protective film. Remove this film before getting started. To avoid damage to the display, the phone should not be used without the top shell. Siemens AG , W:\ICM_MP_CCQ_S_UM\03FL00440 C61 Korrekturen von
Siemens AG , W:\ICM_MP_CCQ_S_UM\03FL00440 C61 Korrekturen von Tony\Work\Ueberarbeitung_24.11.2003\C61\US\C60_Startup.fm Insert SIM card/battery The service provider supplies you with a SIM card on which all the important data for your subscription is stored. If the SIM card has been delivered in credit-card size, snap the smaller segment out and remove any rough edges. 15 • Insert the battery sideways into the phone 3, then press downwards 4 until it engages.
Getting started Charge battery The battery is not fully charged when delivered. Plug charger cable into the bottom of the phone, plug power supply unit into a mains power socket and charge for at least two hours. Charge icon not visible If the battery was fully discharged, the charging symbol will not be immediately visible on connection to the power supply unit. It will appear after up to two hours. In this case the battery is fully charged after 3-4 hours.
Siemens AG , W:\ICM_MP_CCQ_S_UM\03FL00440 C61 Korrekturen von Tony\Work\Ueberarbeitung_24.11.2003\C61\US\C60_Startup.fm 17 Switch on/off/ PIN Activate/deactivate B Hold down On/Off/End key to switch on or off. Enter PIN The SIM card can be protected with a 4- to 8-digit PIN. J Enter the PIN using the number keys. The characters **** appear to ensure nobody can read your PIN on the display. Correct errors with §Clear§. Please enter your PIN: **** §OK§ Confirm entry with right soft key.
Switch on/off/ PIN Signal strength _ ^ Standby mode Strong reception signal. _ A weak signal reduces the call quality and may lead to loss of the connection. Change your location. Service provider 01.10.2003 10:10 NewMMS Without SIM card If you switch on the phone without a SIM card you can still use some phone functions. §Menu§ Press soft key. The functions are displayed. g Menu When the name of the service provider appears on the display, the phone is in standby mode and ready for use.
Siemens AG , W:\ICM_MP_CCQ_S_UM\03FL00440 C61 Korrekturen von Tony\Work\Ueberarbeitung_24.11.2003\C61\US\C60_Startup.fm General Instructions User guide This corresponds to: 1 The following symbols are used to explain operation: J D <> §Menu§ L _ g Service provider 01.10.2003 10:10 NewMMS Enter numbers or letters. B A 19 Menu On/Off/End key. Call key. Press the control key on the side indicated. §Menu§ Open menu. From standby mode: press the right soft key.
General Instructions 3 Call log è ç y ZZ ] Ñ NewMMS §Select§ É 2 Carol Select Press. Z Call log 2-1 › Missed Calls View F 6 Press. Options Scroll to entry required. Press control key at the bottom to scroll down. Z Missed Calls Carol View Select §Select§ Z Missed Calls m Press right soft key to open the Call log submenu. 4 5 §View§ Options Press. Press left soft key to show phone number with date, time and number of calls. Press right soft key to open the Missed Calls list.
Siemens AG , W:\ICM_MP_CCQ_S_UM\03FL00440 C61 Korrekturen von Tony\Work\Ueberarbeitung_24.11.2003\C61\US\C60_Startup.fm Menu speed dialing All menu functions are numbered internally. A function may be selected directly by entering these numbers in sequence. E.g. write new SMS: §Menu§ 5 1 Press. for Messages for New SMS 21 Security Codes The phone and SIM card are protected against misuse by several security codes.
§Menu§ Security ¢ m ¢ Security ¢ Codes ¢ Select function §Menu§ ¢ m ¢ Security ¢ Codes ¢ Select function PIN Control Change PIN2 The PIN is usually requested each time the phone is switched on. You can deactivate this feature but you risk unauthorized use of the phone. Some service providers do not permit deactivating the control. (Display only if PIN 2 is available). Proceed as with Change PIN. §Select§ J Press. Enter PIN. §OK§ Confirm input. §Change§ Press. §OK§ Confirm.
Siemens AG , W:\ICM_MP_CCQ_S_UM\03FL00440 C61 Korrekturen von Tony\Work\Ueberarbeitung_24.11.2003\C61\US\C60_MyPhone.fm My phone Change your phone to match your personal requirements. Ring tones Assign individual ring tones to caller groups or for special dates (p. 81). Own greeting Select a personalized greeting (p. 69). Screensaver Choose a digital clock or a personal picture (p. 70). (Provider) Logo Choose an individual picture (to be displayed in standby mode) (p. 69).
Making a phone call Making a phone call Redial previous numbers Dialing with number keys A Press the Call key twice. A Press the Call key once. A Press ... The phone must be switched on (standby mode). J A Dial number (always with area code, if necessary with international dialing code). §Clear§ A short press clears the last digit, a long press clears the entire phone number. Press the Call key. The phone number displayed is dialed. End call B Press the End key briefly. The call is ended.
Siemens AG , W:\ICM_MP_CCQ_S_UM\03FL00440 C61 Korrekturen von Tony\Work\Ueberarbeitung_24.11.2003\C61\US\C60_Phone.fm Additional notes Save number in Phonebook Save...............................p. 35 §Options§ call lists ............................p. 41 §Hold§.................................................p. 27 §Forward§ Set forward ......................p. 72 y menu§ Call menu.........................p. 29 §Speaker.§ Speakerphone ................p. 26 Microphone off ..................................
Making a phone call Accept call Mute call The phone must be switched on (standby mode). An incoming call will interrupt any other use of the phone. §Mute§ i +5552764556 Answer §Answer§ Mute Press. Or B Press briefly. Additional notes Missed calls.................................p. 41 Accept call using any key ..................p. 71 Switch off ringer.................................p. 11 Speakerphone Or A Press. The call will be forwarded if this has been set previously (p. 72). Press.
Siemens AG , W:\ICM_MP_CCQ_S_UM\03FL00440 C61 Korrekturen von Tony\Work\Ueberarbeitung_24.11.2003\C61\US\C60_Phone.fm g 27 Swapping between 2 calls b Establish a second connection Speaker. G Menu Use the control key to adjust the volume. You can call another number during a call. y menu§ Open the call menu Hold The current call is put on hold. §Speaker.§ Switch off.
Making a phone call Incoming calls during a call You may need to register for this service with your service provider and set your phone accordingly (p. 71). During a call, you may be advised that there is another call waiting. You will hear a special tone during the call. You have the following options: • Accept the waiting call §Swap§ Accept the waiting call, putting the current call on hold to do so. Always proceed as above to swap between the two calls. Ending call(s): Press the End key B.
Siemens AG , W:\ICM_MP_CCQ_S_UM\03FL00440 C61 Korrekturen von Tony\Work\Ueberarbeitung_24.11.2003\C61\US\C60_Phone.fm Call menu Direct Call The following functions are only available during a call: If this is active, only one phone number can be dialed. y menu§ Open menu. Hold (p. 27) Mute Switch microphone on/off. If switched off, the person on the other end of the line cannot hear you (muting). Also: * Hold down. 29 Switch on §Menu§ ¢ m ¢ Security ¢ Direct Call §Select§ Press.
Making a phone call Apply _ g Service provider 01.10.2003 > 10:10 Carol Use the right soft key and hold it down to dial (e.g. Carol's phone number). Switch off J Hold down: Enter phone code. §OK§ Confirm input. §Change§ Press. §OK§ Confirm "Off". Additional notes Change phone code..........................p. 22 Siemens AG , W:\ICM_MP_CCQ_S_UM\03FL00440 C61 Korrekturen von Tony\Work\Ueberarbeitung_24.11.2003\C61\US\C60_Phone.
Siemens AG , W:\ICM_MP_CCQ_S_UM\03FL00440 C61 Korrekturen von Tony\Work\Ueberarbeitung_24.11.2003\C61\US\C60_text.fm Text entry Text entry without T9 Press number key repeatedly until the required letter appears. The cursor advances after a short delay. Example: 2 Pressing briefly once types the letter a, twice the letter b, etc. Hold down to write the number. Ä,ä,1-9 §Clear§ H Special letters and numbers are displayed after the relevant letters.
Text entry Input menu §Select§ With text input: * Hold down: The input menu is displayed: Text format (SMS only) Input language Mark Text Copy/Add Text entry with T9 T9 deduces the correct word from the individual key entries by making comparisons with an extensive dictionary. Activate, deactivate T9 §Options§ Open text menu. T9 Input Select. T9 Preferred Select. §Change§ Activate T9. Select Input language Select the language in which you want to compose your message. §Options§ Open text menu.
Siemens AG , W:\ICM_MP_CCQ_S_UM\03FL00440 C61 Korrekturen von Tony\Work\Ueberarbeitung_24.11.2003\C61\US\C60_text.fm 0 Additional notes Setting a full stop. Word is ended when followed by a blank space. Within a word, a full stop represents an apostrophe or hyphen: e.g. §provider.s§ = provider’s. Move to the right. Ends a word. D Press briefly: Swap between: abc, Abc, T9abc, T9Abc, 123. Status indicator in the top line of the display. Hold down: All input modes are displayed.
Text entry Correct a word Predef. Texts Words written with T9: The phone contains predefined texts that you can add to your messages (SMS, MMS). You can also create and store up to 5 personal stored texts. Each stored text can contain up to 32 characters. H » §Clear§ Move left or right, word by word, until the required word is §inverted§. Scroll through the T9 word suggestions again.
Siemens AG , W:\ICM_MP_CCQ_S_UM\03FL00440 C61 Korrekturen von Tony\Work\Ueberarbeitung_24.11.2003\C61\US\C60_Phonebook.fm Phonebook Number: Enter frequently used phone numbers in the Phonebook with a special name. To dial them, simply highlight the name. If a phone number is stored with a name, it appears on the display when you are called. Important numbers can be assigned to different groups. F Ú Select G J Always enter phone number with an area code.
Phonebook Call (search for an entry) F Open Phonebook. A Number is dialed. J/ G Select a name with the first letter and/or scroll. Call using record no. A record number is automatically assigned to every new entry in the Phonebook. J A Enter input number. Press. Press. Edit entry F Select entry in Phonebook. §Options§ Press and select Edit. G J §Save§ Select desired input field. Make change. Press. Phonebook menu. The following functions are available, depending on the current situation.
Siemens AG , W:\ICM_MP_CCQ_S_UM\03FL00440 C61 Korrekturen von Tony\Work\Ueberarbeitung_24.11.2003\C61\US\C60_Phonebook.fm Assign picture Delete/change image Assign a max. of 50 phone numbers to an individual picture. This picture will appear in the display when there is a call from this number. If a picture is assigned to a phone number, it can be deleted or replaced. 37 F Open Phonebook. G J/ I Select entry. §Options§ §Options§ Open menu. §Select§ Select Picture. A picture list is displayed.
Phonebook F Open Phonebook. Select. Enter "own" phone numbers in Phonebook (e.g., fax) for information. These numbers can be changed, deleted and also sent as an SMS message. / There might be phone numbers saved in your Phonebook that have been provided by your service provider. They may be used to call local or national information services or to use services offered by your service provider.
Siemens AG , W:\ICM_MP_CCQ_S_UM\03FL00440 C61 Korrekturen von Tony\Work\Ueberarbeitung_24.11.2003\C61\US\C60_Phonebook.fm Groups Groups menu Four groups are specified in your phone to enable you to arrange your Phonebook entries clearly. You can rename these groups. §Options§ H Open Phonebook (in standby mode). Select (the number of entries is listed behind the group name). Q Groups t Family à Friends Å VIP Rename I Select a group. §Select§ Open group.
Phonebook Control codes (DTMF) You can, for example, enter control codes (numbers) for remote access to an automatic answering machine while a connection exists. These entries are transmitted directly as DTMF codes (control codes). y menu§ Send DTMF Open the call menu. Select. Use Phonebook Store phone numbers and control codes (DTMF codes) in the Phonebook in the same way as a normal entry. J 0 J 0 J §Save§ Enter phone number.
Siemens AG , W:\ICM_MP_CCQ_S_UM\03FL00440 C61 Korrekturen von Tony\Work\Ueberarbeitung_24.11.2003\C61\US\C60_Records.fm Call log Your phone stores the phone numbers of calls for convenient redialing. §Menu§ §Select§ G §Select§ G A ¢Z Press. Select call list. Press. Select phone number. Dial phone number. Or §View§ Display information on the phone number. Received Calls Accepted calls are listed. ¿ Icon for missed call (in standby mode). Press the control key (on the left) to display phone number.
Camera (Accessories) Camera (Accessories) You can use the phone to immediately view, save and send photos by MMS that you have taken with the "QuickPic" camera (p. 96). A flash is integrated into the camera. Picture A shot (especially in high resolution) requires a few seconds to be processed. §Take§ Pictures can be taken in two different formats: Press. You will hear an advisory tone when the exposure time has expired. The photo is shown on the display and saved automatically.
Siemens AG , W:\ICM_MP_CCQ_S_UM\03FL00440 C61 Korrekturen von Tony\Work\Ueberarbeitung_24.11.2003\C61\US\C60_Camera.fm Sending a photo by MMS Camera menu You can easily send a photo as an MMS immediately after taking it. §Options§ §Options§ Open menu. Send via MMS Select. §Select§ Press and select the desired resolution. §Skip§ Press to skip recording a melody (p. 54). The MMS Editor starts.
Voice mail/mailbox Voice mail/mailbox §Menu§ ¢ ] ¢ Msg. Setup ¢ Voice Message Most service providers offer you an external answering service. In this mailbox, a caller may leave a voice message for you • if your phone is switched off or not ready to receive, • if you do not want to answer, • if you are making a phone call (and Call Waiting is not activated, p. 71). If voice mail is not part of your service provider's package, you will need to register and settings may have to be made manually.
Siemens AG , W:\ICM_MP_CCQ_S_UM\03FL00440 C61 Korrekturen von Tony\Work\Ueberarbeitung_24.11.2003\C61\US\C60_Mailbox.fm Play back messages b A new voice mail can be announced as follows, depending on the service provider: \ Icon including beep. Or … An SMS message announces a new voice mail. Or You receive a call with an automatic announcement. Call your mailbox and play the message(s) back. 1 Hold down (if necessary enter mailbox number once only).
SMS SMS You can transmit and receive very long messages (up to 760 characters) on your phone. They are automatically composed of several "normal" SMS messages (note higher charges). Additionally you can insert pictures and sounds in an SMS. Depending on the service provider, e-mails and faxes can also be sent and e-mails received via SMS (change setting if necessary, p. 51). Writing and sending text messages (SMS) §Menu§ J A ¢ ] ¢ New SMS Text input using "T9" (p.
Siemens AG 2003, W:\ICM_MP_CCQ_S_UM\03FL00440 C61 Korrekturen von Tony\Work\Ueberarbeitung_24.11.2003\C61\US\C60_Messages.fm Picture&Sound Text menu §Options§ Open text menu. Send Save Insert pictures and sounds into message. Enter recipient's phone number/retrieve it from the Phonebook, then send. J Save composed text in draft list. G Picture&Sound Add pictures, animations and sounds into message (see following text). Insert Text Predef. Texts insert (p. 34).
SMS Additional information SMS to group EMS (Enhanced Messaging Service) This service allows you to send pictures and sounds as ring tones and screensavers (except formatted text). Playback only occurs if the destination phone supports the EMS standard. This can result in messages that are longer than a single SMS. If this happens the individual SMS messages are linked together to form a single message. You can send an SMS message as a "notice" to a recipient group.
Siemens AG 2003, W:\ICM_MP_CCQ_S_UM\03FL00440 C61 Korrekturen von Tony\Work\Ueberarbeitung_24.11.2003\C61\US\C60_Messages.fm Receiving SMS … Arrival of new SMS announced on display. _ g Service provider 01.10.2003 < … 10:10 Menu To read the SMS, press left soft key. 49 Phone number/URL in SMS Phone numbers §inverted§ in the text can be dialed or saved in the Phonebook. You can also mark URLs (Internet addresses), call them directly and run them. To this end the WAP profile (p.
SMS Lists Lists menu All SMS and MMS messages are stored in one of the following lists according to status. §Options§ Inbox §Menu§ ¢ ] ¢ Inbox ¢ SMS The list of received SMS messages is displayed. ] Inbox ƒ You have 1 new voicemail … How are you doing? … Call me later. View Draft §Menu§ Each list offers different functions: Open menu. View Read entry. Reply Directly answer incoming SMS messages. Delete Delete selected SMS messages. Delete All Delete all SMS messages after confirmation.
Siemens AG 2003, W:\ICM_MP_CCQ_S_UM\03FL00440 C61 Korrekturen von Tony\Work\Ueberarbeitung_24.11.2003\C61\US\C60_Messages.fm SMS Archive SMS Profiles §Menu§ §Menu§ ¢ ] ¢ SMS Archive The list of SMS messages stored in the phone is displayed. Ñ\SMS archive Inbox Draft Unsent … ƒ ‚ „ ¢ X Open Options Unread. Read Draft. Sent. Entry on SIM card. Concatenated message. Different functions are available depending on the context: Archive menu §Options§ Open menu. View Read entry.
SMS Validity Period Select the period in which the service center tries to deliver the message: Manual, 1 hour, 3 hours, 6 hours, 12 hours, 1 day, 1 week, Maximum * Maximum period that the service provider permits. Status Report You will receive confirmation whether delivery of a message has been successful or unsuccessful. This service may be subject to a charge.
Siemens AG 2003, W:\ICM_MP_CCQ_S_UM\03FL00440 C61 Korrekturen von Tony\Work\Ueberarbeitung_24.11.2003\C61\US\C60_Messages.fm MMS The Multimedia Messaging Service enables you to send texts, pictures (also photos) and sounds in a combined message to another mobile phone or to an e-mail address. All elements of an MMS message are merged to form a "slide show".
Text: MMS §Edit§ buttons. Write text with the help of T9. Text menu, see p. 55. Tones/Alerts: §Insert§ buttons. You can now select a stored melody (see also Own Stuff, p. 87) or record a new melody (see below). Slide duration: Enter length of display for individual pages (minimum 0.1 seconds). Record new melody (ring tone) for MMS If you press §Insert§ in the Tones/Alerts: field when completing the input fields, you have the option of recording a new melody for sending messages by MMS. §Record§ Press.
Siemens AG 2003, W:\ICM_MP_CCQ_S_UM\03FL00440 C61 Korrekturen von Tony\Work\Ueberarbeitung_24.11.2003\C61\US\C60_Messages.fm Send MMS. §Options§ Open menu. Send Select. Open menu. Line Feed Start new line. Save Save MMS text. Delete Text Delete the whole text. T9 Input (p. 31) T9 Preferred Activate/deactivate T9 input. Input language Select language for text. Text Modules Predef. Texts insert (p. 34).
MMS Receive MMS / Attachment Indicates reception or notification of an MMS. _ g Service provider 01.10.2003 < 10:10 Menu To read the MMS or notification, press left soft key. Depending on the setting, (p. 58) the • complete MMS is received • Open notification. Press §Receiving§ to receive the complete MMS. Press any key to cancel function. §Play§ G J Automatic presentation of MMS. Use any key to cancel. Scroll page by page using the control key. Call up individual pages directly by number key.
Siemens AG 2003, W:\ICM_MP_CCQ_S_UM\03FL00440 C61 Korrekturen von Tony\Work\Ueberarbeitung_24.11.2003\C61\US\C60_Messages.fm Lists Lists menu All MMS messages are stored in one of the following lists. Each list offers different functions: Inbox §Menu§ ¢ ] ¢ Inbox ¢ MMS The list of MMS messages and notifications received is displayed. To receive an MMS afterwards, open notification and press §Empfang§. Draft §Menu§ ¢ ] ¢ Draft ¢ MMS The list of as yet unsent MMS messages is displayed.
MMS Preview slide Play back current page. Slide List Display pages available for selection. Attachment Open list of attachments received. Content Selection of page contents to be archived, such as picture or sound. Save Store MMS in outbox list. Symbol ‰ ‡ † Ý Þ Û Ü Meaning MMS unread MMS read MMS Profiles §Menu§ ¢ ] ¢ Msg. Setup ¢ MMS Profiles 3 MMS profiles can be selected. The transmission characteristics of an MMS are defined in these. G Select profile. §Options§ Open menu.
Siemens AG 2003, W:\ICM_MP_CCQ_S_UM\03FL00440 C61 Korrekturen von Tony\Work\Ueberarbeitung_24.11.2003\C61\US\C60_Messages.fm Retrieval MMS Relaysrv. Receive complete MMS or only notification of arrival. Automatic Receive complete MMS immediately. Auto.homenet Receive complete MMS immediately in home network Manual Only the notification is received. MMS relay URL, e.g. http://www.webpage.com IP Settings IP address: Enter IP-address. Port: * Enter port number. IP address: Enter IP-address.
CB Services CB Services §Channel: Select §Menu§ If a topic is selected in the list you can view it, activate/ deactivate it, edit it or delete it. ¢ ] ¢ Msg. Setup ¢ CB Services Some service providers offer information services (info channels, Cell Broadcast). If reception is activated, your Topic Listwill supply you with messages on the activated topics. Broadcast You can activate and deactivate the CB service. If the CB service is activated, standby time for the phone will be reduced.
Siemens AG , W:\ICM_MP_CCQ_S_UM\03FL00440 C61 Korrekturen von Tony\Work\Ueberarbeitung_24.11.2003\C61\US\C60_Surf&Fun.fm Surf & Fun For example the start menu appears: ¢ É ¢ Select function Get the latest information from the Internet that is specifically adapted to the display options of your phone. Internet access may required registration with your service provider.
Surf & Fun End connection B Hold down to clear down the connection and close the browser. Your Internet browser is licensed by: Inbox Inbox for messages from the WAP server (WAP push). Disconnect End connection. Save bitmap Save picture(s) of displayed page. More ... See below. Exit browser Close the browser and shutdown the connection. Browser menu If the browser is active, the menu can be activated as follows: A Press E Í or confirm.
Siemens AG , W:\ICM_MP_CCQ_S_UM\03FL00440 C61 Korrekturen von Tony\Work\Ueberarbeitung_24.11.2003\C61\US\C60_Surf&Fun.fm Reset About Openwave Restart session and clear cache. Display browser version. Additional notes Í Browser menu. É Offline. Ê Online. Ë GPRS online. Ì No network. Select special characters, such as @, ~, \ , see p. 31 or 0 press repeatedly for: .
Surf & Fun Games & More Games and applications Download games and other applications. You are advised about relevant applications on the Internet. Once you have selected a game or application you can start to download it immediately. Then you can use the application. Most applications include instructions. Applications and links that are already stored on the phone are found under: Additional information To download applications, the WAP profile (p. 63), HTTP profile (p. 76) and access (p.
Siemens AG , W:\ICM_MP_CCQ_S_UM\03FL00440 C61 Korrekturen von Tony\Work\Ueberarbeitung_24.11.2003\C61\US\C60_Surf&Fun.fm Receive information Games & More Options If information required, say, by an application that has already been installed, is received via SMS, the § symbol appears in the display. By pressing the left control key, the relevant application is started and the information is processed. Processing and managing your applications and folders: Games Games are stored in the telephone.
Surf & Fun Additional information WAP can be used to download applications (e.g., ringtones, games, pictures, animation) from the Internet. Downloading or running applications will not affect or change the software already installed on your Java™-enabled mobile phone. Siemens excludes all warranty and liability claims in respect of or in connection with any applications subsequently installed by the customer and not included in the original delivery package.
Siemens AG , W:\ICM_MP_CCQ_S_UM\03FL00440 C61 Korrekturen von Tony\Work\Ueberarbeitung_24.11.2003\C61\US\C60_Setup.fm Setup Setup Profiles G Select profile. Several settings can be stored in a phone profile in order, for example, to adapt the phone to the surrounding level of noise. §Options§ Open menu.
Setup Aircraft Mode Profile menu §Options§ Open menu. Activate Activate selected profile. Change Sett. Change profile settings. Copy From Copy settings from another profile. Rename Change personal profile (except default profiles). Car Kit If a Siemens original Car Kit is used (p. 97) the profile is activated automatically as soon as the phone is inserted into the cradle (p. 71). Headset If an original Siemens headset is used (p.
Siemens AG , W:\ICM_MP_CCQ_S_UM\03FL00440 C61 Korrekturen von Tony\Work\Ueberarbeitung_24.11.2003\C61\US\C60_Setup.fm Display Logo §Menu§ Choose picture to be displayed instead of the provider logo, or ¢ m ¢ Display ¢ Select a function. Language Set the language of the display text. When "automatic" is set, the language of your home service provider is used.
§Menu§ Setup ¢ m ¢ Display ¢ Select a function. Illumination Set display light brighter/darker. The darker the setting the longer the standby time. G Press the control key repeatedly to adjust up or down. Contrast Set display contrast. G Press the control key repeatedly to adjust up or down. Screensaver §Menu§ ¢ m ¢ Screensaver The screensaver shows a picture on the display as soon as a period that can be set by you has elapsed. The function is ended by an incoming call or by pressing any key.
Siemens AG , W:\ICM_MP_CCQ_S_UM\03FL00440 C61 Korrekturen von Tony\Work\Ueberarbeitung_24.11.2003\C61\US\C60_Setup.fm 71 Call Setup Car Kit §Menu§ Only in combination with an original Siemens Speakerphone Car Kit (p. 97). If an original Siemens Car Kit Portable is used the profile is activated automatically as soon as the phone is inserted into the cradle. ¢ m ¢ Call Setup ¢ Select a function.
§Menu§ Setup ¢ m ¢ Call Setup ¢ Select a function. Headset Only in conjunction with an original Siemens headset (p. 96). If an original Siemens Headset is used the profile is automatically activated when the headset is plugged in. Auto Answer (factory default: off) Calls are accepted automatically after a few seconds (except where the ringer is switched off or set to beep). You should therefore be wearing the headset.
Siemens AG , W:\ICM_MP_CCQ_S_UM\03FL00440 C61 Korrekturen von Tony\Work\Ueberarbeitung_24.11.2003\C61\US\C60_Setup.fm Not Reachable Forwarding occurs if phone is switched off or is out of range. No Reply A call is only forwarded after a delay that is determined by the network. The period can be set to a maximum of 30 seconds in 5 second intervals. Busy Forwarding occurs if a call is in progress. If Call Waiting is activated (p. 71), you will hear the call waiting tone during a call.
Setup Clock §Menu§ ¢ m ¢ Clock ¢ Select function. Time/Date The clock must be set correctly once at start-up. §Change§ J Press. First enter the date (month/day/year), then the time (12 hours, including seconds). Additional notes If the battery is removed for longer than 30 seconds, the clock must be reset. Setting of the date format to: DD: Day (2-digit) MM: Month (2-digit) YYYY: Year (4-digit) Time Format Select Format 24h or Format 12h. Time Zones Specify your current time zone.
Siemens AG , W:\ICM_MP_CCQ_S_UM\03FL00440 C61 Korrekturen von Tony\Work\Ueberarbeitung_24.11.2003\C61\US\C60_Setup.fm 75 Connectivity Data Services §Menu§ For the MMS, Wap and Java application at least one connection profile must be set up and activated. Presets of the phone depends on current service provider. If necessary, check with your service provider for details. The current settings for a service provider can be found on the Internet at www.my-siemens.com/customercare under "FAQ".
Setup §Edit§ Press. Dial-up number Enter ISP number. Call type: Select ISDN or analoge. Login name: Enter login name. Password: Enter password (shown as a series of asterisks). DNS 1 / DNS 2: (optional). §Save§ Save settings. For GPRS (General Packet Radio Service) GPRS Settings Select. You can activate GPRS for the profile and change the settings here. You can only start to use GPRS once you have activated GPRS on your phone (p. 75). §Edit§ Press. APN: Enter provider address.
Siemens AG , W:\ICM_MP_CCQ_S_UM\03FL00440 C61 Korrekturen von Tony\Work\Ueberarbeitung_24.11.2003\C61\US\C60_Setup.fm Security §Menu§ §Menu§ ¢ m ¢ Security ¢ Select a function PIN Control, Change PIN, Change PIN2, Change Phonecode, (p. 22). b (Phone code is protected) Only one phone number can be dialed. Hold down the right soft key (p. 29). Only ‚ b (PIN2-protected) Restricts dialing options to SIM-protected numbers in the Phonebook.
Setup Outgo Internat. X Home Barred (Outgoing international except home) International calls are barred. However you can make calls to your home country when abroad. All Incoming Calls The phone is barred for all incoming calls (the forwarding of other calls to the mailbox offers a similar function). When Roaming You do not receive calls when you are outside your home network. This means that no charges are incurred for incoming calls.
Siemens AG , W:\ICM_MP_CCQ_S_UM\03FL00440 C61 Korrekturen von Tony\Work\Ueberarbeitung_24.11.2003\C61\US\C60_Setup.fm Network §Menu§ §Menu§ ¢ m ¢ Network ¢ Select a function This function is only displayed if it is supported by the service provider. Two independent phone numbers must be registered on the phone. Select Select the currently used phone number. ‘ Display the current phone number. Block line (Phone code is protected) You may limit usage to one phone number.
Setup Additional information If you are outside your home network, your phone automatically dials another GSM network. If the field strength of the preferred network is not strong enough when you switch the phone on, the mobile phone may register with a different network. This can change when the telephone is next switched on or if you manually select another network. Your service provider is displayed: §List§ Display list of preferred networks.
Siemens AG , W:\ICM_MP_CCQ_S_UM\03FL00440 C61 Korrekturen von Tony\Work\Ueberarbeitung_24.11.2003\C61\US\C60_RingTones.fm Tones/Alerts §Menu§ ¢ ç ¢ Select function. You can set the tones to match your needs. Ringer Setting On/Off Activate/deactivate all ring tones. Beep Reduce ring tone to a short signal (beep). Additional notes k Displays: Beep. j Displays: Ringer off.
Tones/Alerts More Tones... §Menu§ ¢ ç ¢ More Tones... ¢ Select a function. b Call Screening Only calls from numbers that are in the Phonebook or in a predefined group are signaled audibly or by vibrating alert. Other calls are only displayed. If you do not accept these calls, they are forwarded to your mailbox (if set, p. 72). l Screen display in standby mode: when call screening is activated.
Siemens AG , W:\ICM_MP_CCQ_S_UM\03FL00440 C61 Korrekturen von Tony\Work\Ueberarbeitung_24.11.2003\C61\US\C60_Extras.fm Extras §Menu§ Alarm Clock ¢ y ¢ Select function. SIM services (optional) b Your service provider may offer special applications such as mobile banking, share prices, etc. via the SIM card. The alarm will ring at the time set by you, even when the phone is switched off. Setting Set the time for the alarm call (hh:mm).
Extras ¢ y ¢ Select function. §Menu§ Calculator J Stopwatch Two intermediate times can be recorded and saved. Enter number (up to 8 digits). I æ Stopwatch 00:00:00.000 / — J x + Select calculate function. Repeat procedure with other numbers. Result is displayed. Calculator functions §.§=§+§-§*§/§ Press the right soft key repeatedly. Toggle between "+" and "-". % Convert to percent. Ï Save the displayed number. Ð Retrieve the number saved. e Exponent (maximum of two digits).
Siemens AG , W:\ICM_MP_CCQ_S_UM\03FL00440 C61 Korrekturen von Tony\Work\Ueberarbeitung_24.11.2003\C61\US\C60_FastDial.fm Fast access key The left soft key and the number keys 2 to 9 (speed dialing numbers) can each be assigned an important phone number or a function. The phone number can then be dialed or the function can be started at the touch of a button. Additional notes The left soft key may already have a function allocated by your service provider (e.g. access to "} SIM card services").
Fast access key Speed dialing keys Apply Number keys 2 to 9 can be used as speed dialing numbers for fast access. For available key assignments see p. 85. Number key 1 is reserved for the mailbox number (p. 44). Select a stored phone number or start a stored application (e. g. New SMS). Change In standby mode: J §Set§ Press number key (2- 9). If the key is not yet assigned: Press. Or §New SMS Press briefly (if assigned to New SMS, for example). §Change§ Scroll to application in the list.
Siemens AG , W:\ICM_MP_CCQ_S_UM\03FL00440 C61 Korrekturen von Tony\Work\Ueberarbeitung_24.11.2003\C61\US\C60_Explorer.fm 87 Own Stuff The following folders are also included in these main folders: The following folders are provided or organizing your files: Pictures, Animations, Sounds. Download This enables you to download New new files from the Internet.. §Menu§ ¢Ñ Files and folders are displayed. You can scroll through these lists using the control key: G C §Open§ Scroll up and down.
Questions & Answers Questions & Answers If you have any questions regarding the use of your phone, you can contact us at www.my-siemens.com/customercare at any time. In addition to this we have listed some frequently asked questions and answers below. Question Possible causes Phone cannot be On/Off key not pressed long switched on. enough. Possible solution Press On/Off key for at least two seconds. Dead battery. Charge battery. Check charging indicator in the display. Battery contacts dirty.
Siemens AG , W:\ICM_MP_CCQ_S_UM\03FL00440 C61 Korrekturen von Tony\Work\Ueberarbeitung_24.11.2003\C61\US\C60_faq.fm 89 Question Possible causes Possible solution No connection to network. Weak signal. Move to higher location, to a window or open space. Outside GSM range. Check coverage area of service provider. Phone loses network. Calls not possible. SIM card not valid. Contact the service provider. New network not authorized. Try manual selection or select a different network (p. 79).
Questions & Answers Question Possible causes Possible solution Message cannot Service provider does not support Check with your service provider. be sent. this service. Phone number of the service center is not set or is wrong. Set service center (p. 51). SIM card contract does not support this service. Contact your service provider. Service center too busy. Repeat message. Recipient does not have a compatible phone. Check.
Siemens AG , W:\ICM_MP_CCQ_S_UM\03FL00440 C61 Korrekturen von Tony\Work\Ueberarbeitung_24.11.2003\C61\US\C60_Hotline.fm 91 Customer care We offer fast, individual advice! You have several options: Our online support on the Internet: www.my-siemens.com/customercare We can be reached any time, any place. You are given 24 hour support on all aspects of our products.
Customer care Kenya.....................................................2 72 37 17 Kuwait ....................................................2 45 41 78 Latvia .....................................................7 50 11 18 Lebanon...............................................01 44 30 43 Libya ...............................................02 13 50 28 82 Lithuania ...........................................8 52 74 20 10 Luxembourg........................................ 43 84 33 99 Macedonia .............
Care and Your phone has been designed and maintenance crafted with great care and attention and should also be treated with care. The suggestions below will help you to enjoy your phone for many years. • Protect your phone from moisture and humidity! Precipitation, humidity and liquids contain minerals that will corrode electronic circuits. Nevertheless, should your phone become wet, disconnect it immediately from the power supply and remove the battery! Siemens AG 2003, W:\ICM_MP_CCQ_S_UM\03FL00440 C61 Ko
Product data Product data Declaration of conformity Siemens Information and Communication mobile hereby declares that the phone described in this user guide is in compliance with the essential requirements and other relevant provisions of European Directive 1999/5/EC (R&TTE). The declaration of conformity (DoC) concerned has been signed. Please call the company hotline if you require a copy of the original.
Siemens AG , W:\ICM_MP_CCQ_S_UM\03FL00440 C61 Korrekturen von Tony\Work\Ueberarbeitung_24.11.2003\C61\US\C60_Data.fm Lost phone If you lose your phone or SIM card contact your service provider immediately to prevent misuse.
Accessories Accessories Fashion & Mobility Energy Tour Case FCT-651 Stylish protection for active use. Li-Ion Battery 700mAh EBA-510 Spare battery. Travel Charger ETC-520 Travel charger with an extended input voltage range of 100-240V. Car Charger ECC-500 Charger for the cigarette lighter socket in the car. Desk Top Charger EDC-510 The Desk Top Charger enables the phone to be charged easily as well as an additional battery.
Siemens AG , W:\ICM_MP_CCQ_S_UM\03FL00440 C61 Korrekturen von Tony\Work\Ueberarbeitung_24.11.2003\C61\US\C60_Accessory.fm Car Solutions Portable Car Kit HKP-500 Speakerphone kit with integrated loudspeaker and microphone and auto answer feature. Simply plug into the cigarette lighter socket. Particularly ideal for easy transfer between vehicles. Basic Car Pack HKB-500 Allows in-car charging of your mobile phone as well as handsfree talking. Contains a Car Charger, a Headset PTT and a Y adapter.
U.S. FDA U.S. FDA The U.S. Food and Drug Administration's (FDA) Center for Devices and Radiological Health Consumer Update on Mobile Phones FDA has been receiving inquiries about the safety of mobile phones, including cellular phones and PCS phones. The following summarizes what is know — and what remains unknown — about whether these products can pose a hazard to health, and what can be done to minimize any potential risk. This information may be used to respond to questions.
Siemens AG , W:\ICM_MP_CCQ_S_UM\03FL00440 C61 Korrekturen von Tony\Work\Ueberarbeitung_24.11.2003\C61\US\C60_FDA.fm How much evidence is there that handheld mobile phones might be harmful? Briefly, there is not enough evidence to know for sure, either way; however, research efforts are on-going. The existing scientific evidence is conflicting and many of the studies that have been done to date have suffered from flaws in their research methods.
U.S. FDA 2. Researchers conducted a large battery of laboratory tests to assess the effects of exposure to mobile phone RF on genetic material. These included tests for several kinds of abnormalities, including mutations, chromosomal aberrations, DNA strand breaks, and structural changes in the genetic material of blood cells called lymphocytes. None of the tests showed any effect of the RF except for the micronucleus assay, which detects structural effects on the genetic material.
Siemens AG , W:\ICM_MP_CCQ_S_UM\03FL00440 C61 Korrekturen von Tony\Work\Ueberarbeitung_24.11.2003\C61\US\C60_FDA.fm ties, including other federal agencies and industry, to assure that research is undertaken to provide the necessary answers to the outstanding questions about the safety of mobile phones. What is known about cases of human cancer that have been reported in users of hand-held mobile phones? Some people who have used mobile phones have been diagnosed with brain cancer.
U.S. FDA • Cooperate in providing mobile phone users with the best possible information on what is known about possible effects of mobile phone use on human health. At the same time, FDA belongs to an interagency working group of the federal agencies that have responsibility for different aspects of mobile phone safety to ensure a coordinated effort at the federal level.
Siemens AG , W:\ICM_MP_CCQ_S_UM\03FL00440 C61 Korrekturen von Tony\Work\Ueberarbeitung_24.11.2003\C61\US\C60_FDA.fm • World Health Organization (WHO) International Commission on Non-Ionizing Radiation Protection (select Qs & As): http://www.who.int/emf • United Kingdom, National Radiological Protection Board: http://www.nrpb.org.uk • Cellular Telecommunications Industry Association (CTIA): http://www.wow-com.com • U.S.
FCC/Industry Canada Notice FCC/Industry Your phone may cause TV or radio interference (for example, when using Canada a telephone in close proximity to reNotice ceiving equipment). The FCC or Industry Canada can require you to stop using your telephone if such interference cannot be eliminated. If you require assistance, please contact your local service facility. Siemens AG , W:\ICM_MP_CCQ_S_UM\03FL00440 C61 Korrekturen von Tony\Work\Ueberarbeitung_24.11.2003\C61\US\C60_FDA.
Siemens AG , W:\ICM_MP_CCQ_S_UM\03FL00440 C61 Korrekturen von Tony\Work\Ueberarbeitung_24.11.2003\C61\US\C60_Driving_Tips.fm 105 When available, use a hands-free device. Ten Driving Safety Tips Your Siemens wireless phone gives you the power to communicate by voice — almost anywhere, anytime. But an important responsibility accompanies the benefits of wireless phones, one that every user must uphold. When driving a car, driving is your first responsibility.
Ten Driving Safety Tips Dial sensibly and assess the traffic. If possible, place calls when you are not moving or before pulling into traffic. Try to plan your calls before you begin your trip, or attempt to coincide your calls with times you may be stopped at a stop sign, red light or otherwise stationary. But if you need to dial while driving, follow this simple tip — dial only a few numbers, check the road and your mirrors, then continue.
Siemens AG , W:\ICM_MP_CCQ_S_UM\03FL00440 C61 Korrekturen von Intellectual Property Intellectual Property Restrictions All Intellectual Property, as defined below, which is owned by or otherwise the property of Siemens Information and Communications Mobile, LLC (“Siemens”), its affiliates, partners or suppliers, relating to the Phone, including but not limited to accessories, parts or software relating thereto (the “Phone System”), is proprietary under federal laws, state laws and International treaty pro
Battery quality statement The capacity of your cell phone battery will reduce each time it is charged/emptied. Storage at too high or low temperatures will also result in a gradual capacity loss. As a result the operating time of your cell phone may be considerably reduced, even after a full recharge of the battery. Regardless of this, the battery has been designed and manufactured so that it can be recharged and used for six months after the purchase of your cell phone.
Siemens AG 2003, W:\ICM_MP_CCQ_S_UM\03FL00440 C61 Korrekturen von Tony\Work\Ueberarbeitung_24.11.2003\C61\US\C60_MenuTree.fm 109 Menu tree è Phonebook > > Z Call log Mobile > Missed Calls Received Calls Dialed Calls Clear Log É Surf & Fun > Homepage Bookmarks Internet Games & More ç Tones/Alerts > Ringer Setting Vibrating Alert Volume d Calls Group Tones Other Tone Alarm Tone Messages More Tones...
Menu tree ] Messages > New SMS New MMS Predef. Texts Inbox > SMS MMS Draft > SMS MMS Unsent > SMS MMS Sent > SMS MMS SMS Archive Msg. Setup > T9 Preferred Input language SMS Profiles MMS Profiles Voice Message CB Services > Broadcast Topic List Camera y Extras > Alarm Clock Calculator Ñ Own Stuff > Pictures Animations Tones/Alerts Siemens AG 2003, W:\ICM_MP_CCQ_S_UM\03FL00440 C61 Korrekturen von Tony\Work\Ueberarbeitung_24.11.2003\C61\US\C60_MenuTree.
Siemens AG 2003, W:\ICM_MP_CCQ_S_UM\03FL00440 C61 Korrekturen von Tony\Work\Ueberarbeitung_24.11.2003\C61\US\C60_MenuTree.fm m Setup > Profiles > Normal Env. Quiet Env. Noisy Env. Car Kit Headset Aircraft Mode Display > Language Background Logo Color Scheme Own Greeting Large Font Illumination Contrast Screensaver > Enable Style Preview Timeout Code Protect.
Menu tree m Setup > Call Forward > All Calls Status Check Clear All Clock > Time/Date Time Format Time Zones Date Format Buddhist Year Show Clock Connectivity > Data Counter Conn. Profiles HTTP Profile > MMS, Wap Java Authentication Security > Only ‚ Codes > PIN Control This SIM Only Change PIN Phone Identity Change PIN2 Filesystem clean up Chg.Phonecode Master Reset m Setup > Network > Line Network Info Auto Network Choose Network > Select Block line Siemens AG 2003, W:\ICM_MP_CCQ_S_
Siemens AG 2003, W:\ICM_MP_CCQ_S_UM\03FL00440 C61 Korrekturen von Tony\Work\Ueberarbeitung_24.11.2003\C61\US\C60_LionSIX.fm 113 Index A Accessories ................................ 71, 96 Acoustic Shock Warning................... 3 Alarm clock ...................................... 83 Alarm tones ..................................... 82 All incoming (Barrings) .................. 78 Answering service (in the network) .............................. 44 Any key answer (answer call) ........
Index D H Data Connection (settings) ............ 75 Data exchange (settings) ............... 75 Data service (settings) .................... 75 Date format ..................................... 74 Dialing with number keys .............. 24 Direct call ......................................... 29 Display Color schemes ............................. 69 Contrast ....................................... 70 Illumination ................................. 70 Symbols........................................
Siemens AG 2003, W:\ICM_MP_CCQ_S_UM\03FL00440 C61 Korrekturen von Tony\Work\Ueberarbeitung_24.11.2003\C61\US\C60_LionSIX.fm Menu tree ...................................... 109 Message CB .................................................. 60 MMS ............................................. 53 SMS......................................... 46, 49 Message memory ............................ 49 Messages CB .................................................. 60 MMS .............................................
Index Security codes ................................. 21 Service center (SMS)....................... 51 Service numbers (Siemens) ........... 91 Service tones ................................... 82 Setup Call forwarding............................ 72 Clock ............................................. 74 Data connection.......................... 75 Network ....................................... 79 Phone ........................................... 71 Security ........................................