User's Guide

©
Siemens AG 2003, W:\ICM_MP_CCQ_S_UM\04FL00594 R66_USA_Ersterstellg\Fi-
Settings106
VAR Language: am; VAR issue date: 040720
left page (106) of CT66 Cingular am, A31008-H7840-A65-1-4A19 (04.08.2004, 16:58)
Settings
Security
§Menu§ ¢T¢More Settings
¢Security
¢Select function.
Auto Key Lock
The keypad is locked automatically if
no key has been pressed for one
minute in standby mode. This pre-
vents the phone from being used ac-
cidentally. However, you can still be
called and you can still make an
emergency call.
Only ‚ b
(PIN2 or phone-code protected)
Dialling options are restricted to SIM-
protected phone numbers in the
SmartChip. If only area codes are en-
tered, relevant phone numbers can
be added to these manually before
dialling.
If the SIM card does not support PIN2
input, the whole SmartChip can be
protected with the phone code.
Codes
For description see p. 24:
PIN Control, Change PIN, Change PIN2,
Chg.Phonecode
This Chip Only b
(Phone-code protected)
The phone can be connected to a
SIM card when the phone code is en-
tered. Unless the phone code is
known the phone will not operate
with a different SIM card.
If the phone is to be used with a dif-
ferent SIM card, enter the phone
code when requested.
Additional information
The keypad can also be directly locked and
unlocked in idle state.
In each case:
#
Press and hold.