User's Manual

89Settings
© Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\C75_Aries_1\Output\FUG\C75_FUG_FCC_us-en_050608_te\Aries_CallSetup.fm
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050524
right page (89) of C75 FCC, us-en FUG am, (09.06.2005, 08:40)
Settings
Call setup
C
¢T¢Call setup
¢Select function.
Hide ID b
When you make a call, your phone
number can be displayed on the re-
cipient's display (depending on the
service providers).
To suppress this display, you can en-
able the "Hide ID" mode for all subse-
quent calls or just for the next call.
You may need to register separately
with your service provider for these
functions.
Call waiting b
If you are registered for this service,
you can check whether it is set and
you can activate/deactivate it.
Divert
You can specify the conditions under
which calls should be diverted to
your mailbox or other numbers.
Status check
You can check the current divert sta-
tus for all conditions. After a short
pause, the current situation is trans-
mitted by the network and
displayed.
Ö Condition set.
Õ Not set.
Ô
Display if status is un-
known (e.g. with a new
SIM card).
Clear all
b
All set diversions are cleared.
Set up call divert (example)
The most common condition for call
divert is, for example:
Unanswered
b
I
Select Unanswered. (In-
cludes the conditions Not
reachable, No reply, Busy,
see below)
C
Confirm.
Set Select.
C
Confirm.
Ï/J
Select or enter the phone
number to which the calls
are to be diverted.
§Mailbox§ Use existing mail-
box phonenumbers, or
enter them if necessary.
§OK§ Confirm. After a short
pause, the setting is con-
firmed by the network.