User's Manual

Getting started12
© Siemens AG 2004, E:\Auftrag\Siemens\MobilePhones\FCCs\cf76\SUG\S_ADONIS_Main.fm
left page (12) of CF76 SUG 140 mm us-en, A31008-H6090-A40-1-4A19 (28.09.2005, 12:26)
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050718
Getting started
Inserting the SIM card/battery
The service provider supplies you with a
SIM card on which all the important data
for your line is stored. If the SIM card
(Subscriber Identification Module) has
been delivered in credit-card size, snap
the smaller segment out and remove any
rough edges.
Press the grooved area
1, then push
cover towards the front in the direction
indicated by the arrow 2.
• Place the SIM card in front of the slot
with the contact surface facing down-
wards. Then press the SIM card slightly
to push it in
3 (ensure that the cham-
fered corner is in the correct position).
• Insert the battery sideways into the
phone
4, then press it downwards 5
until it engages.
• To remove, press the retaining tab on
the side of the battery, then lift the bat-
tery out.
• Place the cover in position and push it
towards the front
6 until it clicks into
place.
Charging the battery
The battery is not fully charged when de-
livered. Plug charger cable into the bot-
tom of the phone, plug power supply unit
into a wall outlet and charge for at least
two hours.
When charging in progress,
Y is
displayed.
1
2
3
5
4
6