User's Manual

19Calling
right page (19) of CF76 SUG 140 mm us-en A31008-H6090-A40-1-4A19 (28.09.2005, 12:26)
© Siemens AG 2004, E:\Auftrag\Siemens\MobilePhones\FCCs\cf76\SUG\S_ADONIS_Main.fm
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050718
Calling
Enter the number (always with area code/
international dialing code). Press]briefly
to clear the last digit, a long press clears
the entire phone number.
To dial international dialing code press
and hold
0 until a "+" is displayed. Press
§Country§ and select country.
Press
A to dial phone number.
End call
Press the End key B briefly or simply
close the clamshell.
Set volume
Press G upwards/downwards or use the
sidekeys in order to adjust the volume.
Redial previous numbers
Press A twice press to redial the phone
number last called:
To call up the redial list, press
A once.
Pick out a phone number with G, then
press
A to select it.
Auto redial
Press §Auto dial§ for automatically dialing
the phone number ten times at increas-
ing time intervals.
Reminder
Press §Prompt§ and a beep will remind you
to redial the displayed phone number af-
ter 15 minutes.
Accept call
Press A.
Accept the call before bringing the telephone
to your ear to avoid ear damage caused by the
ringing tones.
When Clamshell ans. (p. 33) is activated, a
call can be answered by simply opening
the clamshell.
Reject call
PressB briefly.
Handsfree
Press §Handsfr.§ to play back via loud-
speaker.
Always switch off "handsfree talking" before
holding the phone to your ear! Otherwise, you
might damage your hearing!
Call options
Press §Options§ to use features that are only
available during the call.
Switching between 2 calls b
To establish a second connection, press
§Options§ ¢ Hold and dial a new phone
number. With §Options§ ¢ Toggle you can
switch between calls.
Incoming calls during a call
You will hear a "knocking tone" and you
can now
• Accept the waiting call and put the cur-
rent call on hold with
§Toggle§,
• Reject the waiting call with
§Reject§ or
forward it to the mailbox with §Forward§,
• End the current call with
B
and ac-
cept the waiting call with

.
End call(s)
Press the End key B and §Yes§ to take call
on hold or §No§ to end all calls.
Conference b
You can call up to conference participants
one after the other. Once you have estab-
lished a connection:
Press
§Options§ ¢ Hold and dial a new
phone number to establish a new con-
nection. Press
§Options§ ¢ Conference to
open a conference. Repeat until all par-
ticipants are connected.