User's Manual

33Setup
right page (33) of CF76 SUG 140 mm us-en A31008-H6090-A40-1-4A19 (28.09.2005, 12:26)
© Siemens AG 2004, E:\Auftrag\Siemens\MobilePhones\FCCs\cf76\SUG\S_ADONIS_Main.fm
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050718
All calls
All calls are forwarded.
Ç is shown in the
top line of the display in standby mode.
Other possible forwarding conditions:
Not reachable, No reply, Busy,
Receiving fax, Receiving data
Call screening
Only calls from phone numbers that are
in the Phonebook/Addressbook or in a
group are signaled. Other calls are only
displayed.
Any key
Incoming calls can be accepted by press-
ing any key (except for B).
Clamshell ans.
Incoming calls can be accepted by open-
ing the clamshell.
Minute beep
During the call, you (and only you!) will
hear a beep after each minute as a re-
minder of the time elapsed.
Phone setup
 ¢ T ¢Phone setup
¢Select feature.
Key tones
Set the type of acoustic key acknow-
ledgment.
Info tones
Set service and alarm tones.
Auto off
The phone switches off each day at the
set time.
Phone identity
The phone identity number (IMEI) is dis-
played. This information may be useful
for customer service.
Press
§More§ several times to display addi-
tional information about the device.
Device check
After the last information page, a self-test
as well as individual test are offered. If
you select Self test, all individual tests are
carried out.
Software version
Display in standby mode:
Enter
*
# 0 6 #, then press §More§.
Memory assis.
The memory assistant will help you if
there is insufficient phone memory.
File system
Format
(Phone-code protected)
The telephone memory is formatted and
all saved data such as ringtones, pictures,
games, etc. are deleted. Formatting can
last longer than one minute.
Clean up
Create more memory by deleting tempo-
rary files that are no longer required.
Fact. settings
Reset phone to default values (factory
setting). This does not affect the SIM card
or the network settings.
Alternatively enter in standby mode:
*
# 9 9 9 9 # A
Clock
 ¢ T ¢Clock
¢Select feature.
Time/date
Press §Change§, then enter the date and the
time.
Time zones
Set the time zone for your area.
World map
Display of the world time zones.
Select a time zone with
H.