User's Manual

Fast access key36
© Siemens AG 2004, E:\Auftrag\Siemens\MobilePhones\FCCs\cf76\SUG\S_ADONIS_Main.fm
left page (36) of CF76 SUG 140 mm us-en, A31008-H6090-A40-1-4A19 (28.09.2005, 12:26)
Template: X75, Version 2.2; VAR Language: am; VAR issue date: 050718
Accessories
 ¢ T ¢Accessories
¢Select feature.
Car Kit
Only in combination with an original
Siemens handsfree car kit. The car kit pro-
file is automatically activated as soon as
the phone is placed in the cradle.
Auto answer
(factory default: off)
Calls are accepted automatically after a
few seconds. Eavesdropping is possible!
Automatic switch off
(factory default: 2 hours)
The phone is powered by the car's power
supply. Set the time that must elapse af-
ter the ignition has been switched off and
before the telephone is automatically
switched off.
Car loudspk.
Improves playback in certain
circumstances.
Headset
Only in conjunction with an original Sie-
mens headset. If an original Siemens
Headset is used, the profile is automati-
cally activated when the headset is
plugged in.
Auto answer
(factory default: off)
Calls are accepted automatically after a
few seconds (except if the ringer is
switched off or set to beep). You should
therefore be wearing the headset.
If you do not notice that your phone has accept-
ed a call, there is a risk of the caller eavesdrop-
ping.
In conjunction with a Car kit or headset,
closing the clamshell will not cancel dialing
or incoming calls.
Fast access key
Softkeys
Assign one phone number or feature to
each of the two softkeys.
Change
For example, the Internet feature is as-
signed to the softkey. To change this (in
standby mode):
Briefly press
§Internet§, then §Change§. Select a
new feature from the list and confirm
with
.
Apply
The "Internet" is just used as an example
here.
Press and hold
§Internet§, the application is
started.
Speed keys
Assign one phone number or feature to
each of the keys from 2 to 9. The 1 key is
reserved for the mailbox.
Assigning features
Press a number key (e. g. 3) briefly,
then press
§Set§. Select a new feature to
be assigned from the list and confirm
with .
Apply
Select a stored phone number or start a
stored application (e. g. Calendar).
In standby mode: Press and hold
3.