User Manual

Headset Bluetooth
®
(en)
© Siemens AG 2005, C:\_Christine\Accessories\05GUW00103 Loennerheden_Headsets HHB-100\Work\Satz\Frame
l
e
f
t page
(8)
o
f
H
ea
d
set
Bl
uetoot
h
HHB
-
100
en,
A31008
-
H2801
-
A102
-
1
-
ZC19
8
Template: X75, Version 2.2;VAR Language: unknown; VAR issue date: VAR_Issue_DATE
During calls
You can regulate the volume of
the headset via the mobile
phone.
a Press 2 x briefly: Hold
call. Press again
2xbriefly: Continue
call.
a Press and hold: End
call.
Second call
b
a
Press and hold: End
the current call.
a Press briefly: Hold the
current call and ac-
cept the waiting call.
a Press 2 x briefly: Swap
between two calls.
a Press 2 x and hold: End
all calls.
Transferring a call
a Press briefly: Take the
current call on the
headset.
a Press briefly: Transfer
current call to phone
(if supported by the
phone).
For additional information
please consult your mobile
phone's user guide.
Troubleshooting
Headset does not work
• When the battery is empty, the head-
set gives a warning tone and a flash-
ing signal, see page 7:
¢ Insert new battery.
Bluetooth
®
connection problems
• The Bluetooth Profile of your mobile
phone and your headset are not com-
patible, see page 3.
• No mobile phone is connected, see
page 6.
• You can recognise the threat of a call
being cut off by the poor audioquality.
¢ Reduce the distance between
headset and mobile phone.
• If the mobile phone is not connected
to the network, you will hear a
recurring beep tone in the headset.
If the Bluetooth
®
connection to the
mobile phone is interrupted for
several seconds during a call, you
can only continue the call with the
mobile phone.