User Manual

8 How to assemble your monitor hardware

How to assemble your monitor hardware

• If the computer is turned on you must turn it off before continuing.

Do not plug-in or turn-on the power to the monitor until instructed to do so.

• The following illustrations are for your reference only. Available input and output ports may vary depending on

your purchased model.

1. Attach the monitor base.

Please be careful to prevent damage to the monitor. Placing the screen surface on an object like a stapler or a

mouse will crack the glass or damage the LCD substrate voiding your warranty. Sliding or scraping the monitor

around on your desk will scratch or damage the monitor surround and controls.

Protect the monitor and screen by clearing a flat open area on your desk and placing a soft item

like the monitor packaging bag on the desk for padding.

Gently lay the screen face down on a flat clean padded surface.

While holding the monitor firmly against the desk,

pull the monitor stand arm upwards clear of the

monitor.

Orient and align the stand base socket with the end

of the stand arm, then push them together. Tighten

the thumbscrew on the bottom of the monitor

base as illustrated.

Gently attempt to pull them back apart to check

that they have properly engaged.