User Manual

14 How to assemble your monitor hardware
You might want to adjust the monitor stand height.
See Adjusting the monitor height on page 21 for
more information.
You should position the monitor and angle the screen to
minimize unwanted reflections from other light sources.
2. Connect the PC video cable.
To Connect the D-Sub Cable
Connect the plug of the D-Sub cable (at the end
without the ferrite filter) to the monitor video
socket. Connect the other end of the cable (at the
end with the ferrite filter) to the computer video
socket.
Tighten all finger screws to prevent the plugs from
accidently falling out during use.
To Connect the DVI-D Dual Link Cable
Connect the plug of the DVI-D Dual Link cable to
the monitor video socket. Connect the other end of
the cable (at the end with the ferrite filter) to the
computer video socket.
Tighten all finger screws to prevent the plugs from
accidently falling out during use.
Either
Or