User's Manual
Table Of Contents
- Preparing Your Phone For Use
- Getting to Know Your Phone
- Using Your Phone
- Making a Phone Call
- Ending a Phone Call
- Answering a Phone Call
- Rejecting an Incoming Call
- Turning Off the Ring Tone for an Incoming Call
- Making an International Call
- Making an Emergency Call
- Dialing an Extension Number
- Speed Dialing
- Voice Dialing
- Listening to Voicemails
- Phone Book
- Last Missed, Dialed, and Received Calls
- Operations During a Call
- Call Menu
- Using the Silent Profile
- Camera Function
- Using the Album
- Profiles
- Shortcuts Menu
- Input Modes
- Messages Menu
- Voice Memo
- Direct Connection to URLs
- Menus
- Care and Maintenance
- Troubleshooting
Getting to Know Your Phone 13
•
You can set the the wallpaper used for the main display's standby
screen by going to the menu Media Center > Picture or
Animation, or Settings > Display > Wallpaper. See page 90 and
page 119.
• To set the current time and date, as well as the format in which they
will be shown in the main display's standby screen, go to the menu
Settings > Date & Time. See page 117.
• You can go to the menu Settings > Profiles > Personal to change
the name of the profile to your own user name. When this profile is
activated, your own name will appear in the standby screen. For
details, see page 48.
• For enhanced security, you can use the screen lock function. Go to
the menu Settings > Security > Screen Lock. If the screen lock is
activated, and you have not performed any tasks with the phone for
a set time, the phone will automatically bring up the screen lock
image. The purpose is to protect any personal data on your phone
from being read by other persons. To restore the original display
screen, you must enter a password that you provide for this
function. For details on settings, see page 130.
• After the standby screen remains for 10 seconds, the soft key bar,
time and date, as well as other information currently displayed will
automatically disappear, showing the full-screen wallpaper. You can
also press to display/hide the status bar and phone information
shown on the standby screen.