User's Manual

BENQ Corporation
22
very good indicator of receiving and transmitting errors over the radio.
 Configuration
In this page, you can configure your WLAN settings.
- New
In the beginning, there is no default settings. A new WLAN setting profile can be set
up by press “New” and one configuration menu will pop up.
- Modify
You could modify the existing WLAN setting profile by pressing the button. The
configuration menu of the existing profile will pop up.
- Remove
You may remove your existing profile anytime.
- Active
You may select different setting profile based on the different situations, or in
environments. After selecting, please press active to activate the profile or it will not
effective.
Configuration menu
Profile Name
After selecting the profile, a profile
menu will pop up. In this “Profile
Name” field, please name you
setting profile, ex WLAN_home,
WLAN_office, and etc.
SSID (Network Name)
This field shows the network name
or called SSID, which your W10 will
be associated with. If “ANY” is the
name showed, it means any network
name could be associated with.