User's Manual

BENQ Corporation
23
Network Type
You can select from a list of supporting network types in this field. The network types
displayed will have two values as following: “Infrastructure” and “Ad-Hoc”.
Channel
This field shows the current radio channel, which is being used for an active
connection. In “Ad-Hoc” mode, please select your channel responding to other WLAN
adapters you would like to associate with. This is a non-compliant mode, which will
allow W10 cards to talk to one another without an AP regardless any SSID.
WEP
Mode:
You could active or inactive your WEP security function by selecting “On” or “Off”.
Key Length:
According to WEP function select, this page allows the entry of four keys for 64-bit
or 128-bit encryption key. Each key must consist of hex digits to be written to the
driver and registry. This means that only digit number 0-9 and letters A-F are valid
entries. Therefore, if entered incorrectly, the program will not write keys to a
driver.
Key 1 – Key 4:
When you want to enter the keys manually, you may use these four fields. If you
wish this node to match keys in a different vendor’s product, this may be
necessary.
Key ID:
You may select one from the 4 keys you have entered to match with the AP’s
WEP key.
Apply:
This button becomes active only when one of the fields has been modified. Press
this button to apply the changed values to the driver and saves them to the
registry.