User's Manual

BENQ Corporation
17
3.1.2.1.2.1 GPRS Connection setting
Please select networking-> GPRS to bring up the GPRS Connection panel.
 First time User
1. If this is the first time you using
W10 connecting GPRS，you need
to create one new connection
profile. Please press “New” in the
control panel of GPRS connection.
2. After selecting “New”, the
sub-menu will pop-up. (Please
inquire the operator of your SIM
card provider about the GPRS
configuration.)
a. Name your GPRS connection
at the Profile Name.
b. Input the APN number
provided by your GPRS
operator, for example you
may put “internet” at this box. And then select “OK” to confirm the settings.。
c. ID/ Password
Please input your ID and Password, if requested by your operator.
3. After complete the setting, the new profile name will show up at the Profile name list
dialogue box.
4. Select the profile name from the list and push “Connect” to connect to GPRS network.
5. If the connect to GPRS network successfully, the status of GPRS connection will be
shown on the system tray.