User's Manual

BENQ Corporation
18
3.1.2.1.3. WLAN
When users choose network configuration, the submenu will pop up. Left
click the mouse on the WLAN item and the WLAN control panel will pop
up.
 Status
- Network Adapter
You can select from a list of supporting
network adapter in this field. (Please
kindly select BenQ W10 GPRS with
WLAN PC Card
- State
The current state of the driver is displayed in this screen. If the state reveals
“Associated,“ it means that the normal flow of operation is in Infrastructure mode. This
shows that the PC is already connected to access point and BSSID is also shown in
the form of hex digits. At the same time, the networking is available for the device.
In “Scanning ” state, it means that the node cannot detect the SSID to an access point
within range and is searching for an available access point. Also, if the driver failed to
initiate for some unknown reasons, this field will display an error message.