Installation Instructions Part 2

Using the Application Programs 51
To activate this function:
1. Tap the Add party to contacts drop-down menu and select On.
2. Tap Done.
Call Meter
The call meter function allows you to set a limit for total call
costs. If call costs exceed this limit, the P30 will no longer be able
to dial pay calls.
To set up call meter:
1. Enter the price unit for calculating call cost in the
Price per
unit field. The value must be between 0.01 and 9999999.
2. Enter the 3-character name of currency in the Currency field.
3. Select a Credit status: Limited or Unlimited.
4. Enter a credit limit in the Remaining credit field. The value
must be between 0.01 and 9999999.
5. Tap
Done.
6. Enter your PIN 2 code and then tap Done.
• The PIN2 is the second PIN code. Its main use is in controlling
restricted services. For example, call time limits and restricted
phone numbers.
• If the PIN2 code is incorrectly entered three times consecutively,
the PIN2 code will be locked. To unlock the PIN2 code, you will
need to enter the PUK2 code, which you obtain from your net-
work operator.
If the
Credit status is set to Limited and there is only 30 seconds
of credit left, the message “Low credit“ will appear on the screen.
If “Credit expired” appears, you can not make any chargeable
calls.
For the availability and more information about the Call meter func-
tion, please consult your network service provider.
Call Waiting
If there is an incoming call when you are in the middle of another
call and the call waiting function is enabled, the screen will dis-
play the number (if available) of the incoming call and call wait-
ing message to alert you.
1. After
Call waiting is selected, the P30 will inquire the status of
your call waiting setting. This will take a few seconds.
2. Select from the following options:
•
On: Enable call waiting.
• Off: Disable call waiting.
3. Tap
Done to exit.
Calling Cards
You can use this option to setup P30 for use with your calling
cards.
1. Tap the
New button to add a new calling card.
2. Enter necessary information and then tap the Done button.
3. Tap Calling card mode to select from Off, Prompt before call or
Always use calling card. If you have multiple calling cards,
select one from the Calling cards box first.
4. Tap the Done button.
If you want to delete a calling card, tap to select one in the Calling
cards box and then tap the Delete button.
f you want to edit a calling card, tap to select one in the Calling
cards box and then tap the Edit button.
Divert calls
1. After
Divert call is selected, the P30 will inquire the status of
your call waiting setting. This will take a few seconds.
P30_E.book Page 51 Thursday, April 29, 2004 8:50 AM