Installation Instructions Part 2

Getting Your P30 Connected and Synchronized 97
Synchronizing Data
Performing Local Synchronization Using BenQ
Handset Manager
Using the supplied USB cable and the BenQ Handset Manager
software program, you can easily keep your P30 data synchro-
nized with the data on your PC.
The synchronization setup must be completed before you can per-
form synchronization.
1. Make sure that the power of your P30 is on. Connect the USB
connector on the P30 to a USB port on the PC using the sup-
plied USB cable.
2. On your PC, click the
Start button on Windows Taskbar and
select Programs, BenQ, Synchronise.
3. The synchronization will start automatically.
Performing Remote Synchronization with a Server
If you are frequently on the move and need to keep your data syn-
chronized, remote sync will be an ideal choice. Remote synchro-
nization requires support of the following from your network
service provider:
• GPRS, HSCSD or CSD data connection service
• A synchronization server
In order to perform remote synchronization, you need to cor-
rectly configure the remote synchronization settings.
Configuring Remote Synchronization Settings
Consult your network service provider and obtain the following
information:
• Remote synchronization server address
• User name and password
Next, configure the remote synchronization settings following the
steps below.
1. On the Application Launcher screen, tap the Sync program
icon.
2. Tap
Edit and select Preferences from the menu that appears.
3. According to the data obtained form your network service pro-
vider, complete the settings on the
Server and Protocol tabs.
3. Specify a name for your
P30 and click Next.
4. Click Finish.
P30_E.book Page 97 Thursday, April 29, 2004 8:50 AM