User's Manual Part 2

58 Connectivity
5. If authentication information is needed, tap the ‘Network Key’ and ‘802.1x’ tabs to fill
in the setting values. (Check with your network administrator to obtain the setting val-
ues for your specific wireless network.)
6. Tap the ‘OK’ icon on the top-left corner to save and close the window.
Searching for wireless networks to access
Searching for wireless networks to accessSearching for wireless networks to access
Searching for wireless networks to access
Networks that you have already configured are preferred networks and are listed in the
Wireless Networks listbox. You can choose whether to connect only to preferred networks
or to have your phone search for and connect to any network (preferred or not).
1. On the Network Card Settings
Network Card SettingsNetwork Card Settings
Network Card Settings screen, next to ‘Networks to access’, tap the type of net-
work you want to connect to (‘All Available’, ‘Only access points’, ‘Only computer-to-
computer).
2. To connect only to networks that have already been configured, clear the ‘Automatically
connect to non-preferred networks’ checkbox.
If you check the ‘Automatically connect to non-preferred networks’ checkbox, your phone
will detect any new network and provide you the opportunity to configure them.
Using Bluetooth
The PDA phone comes with built-in Bluetooth technology which allows you to commu-
nicate with other Bluetooth devices over a maximum approximately 10 meters (30 feet).
1. Tap the Bluetooth icon.
2. Check off the’ Turn on Bluetooth’ and ‘Make this device discoverable to other devices’
checkboxes.
When Bluetooth is powered on, the status LED will blink a blue light.
3. Tap the Devices
DevicesDevices
Devices tab.
4. Tap New
NewNew
New to begin searching for possible new Bluetooth devices to bond with in the sur-
rounding areas.
5. Once searching ends and devices are found, tap a device name to highlight it and tap
Next
NextNext
Next.
6. Enter the ‘Passkey’ for the device and Tap Finish
FinishFinish
Finish.