Datasheet
English
Touring Your Camera2
1.2.2 Rear View
• The LCD on the digital camera is manufactured with sophisticated technology; however,
the display may have some light spots or show unusual colors. This is normal and does
not indicate display malfunction, nor will this affect the pictures you take with the camera.
1.2.3 Five-function buttons
X Scene/Delete/Up button
Y Flash/Right button
Z SET/ADJ button
[ Self-timer/Continue/Down button
\ Macro/Left button
1.3 Setting the Date and Time
When the camera is first turned on, the date and time setting will not be correct. So before
using, be sure to set date and time.
• If you hold downor, you can change the value quickly.
• If the batteries are removed for about two days, the Date & Time setting will be lost. In this
case, make these settings again.
1. Press the MENU button, usingorto select SETUP ()
and press the SET button.
2. Press orto select DATE & TIME ( ) then press or
the SET button to launch the Date & Time screen.
3. Press orto change the value of the highlighted field.
Pressorto highlight another field.
4. After adjusting the settings, press the SET or the MENU
button to apply the setting.
1. LCD monitor
2. Zoom out button
3. Zoom in button
4. Playback mode button
5. MENU button
6. Status LED
7. Five-function buttons
8. Strap eyelet
9. Mode dial
10. Battery/SD memory
card cover
11. DISP button
12. Tripod socket
X
Y
[
Z
\
DC_C1000_UM.book Page 2 Wednesday, June 7, 2006 10:54 AM