User`s manual

70 Using Your Phone
MMS
You can edit and send MMS messages using this menu.
Before you start to use MMS, you must subscribe to both GPRS and
MMS services provided by your operator. Some operators may
complete needed MMS settings for you after you subscribe to MMS.
If this is not the case, you need to manually configure MMS settings in
your phone to be able to use MMS.
Because MMS uses your operator's MMS server on a GPRS network
to send messages to phones, you need to adjust the following settings
correctly in order to use MMS:
Go to menu: Oper.Service > Wap >
Settings, choose the server you want
to use, then press to adjust the settings below
:
Home Page For example, http://eWAP/
Gateway Address For example, 10.1.1.1
Port Number For example, 9201
Go to menu: Oper.Service > Connect Settings, choose the group of
GPRS settings you want to use, then press to adjust the settings
below
:
User ID For example, WAP
Password For example, WAP
APN Name For example, mms
DNS For example, 10.1.1.1
Go to menu: Oper.Service > Connect Settings > AP Uplink Settings >
MMS to choose the desired group of GPRS settings to use for MMS.
Go to menu: Messages > MMS > Settings >MMS Server: choose the
MMS server setting you want to use.