AP75a Mobile Phone User Manual
Copyright © 2006. BenQ Corporation. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission of BenQ Corporation. * This publication includes images from CorelDRAW® 9 which are protected by the copyright laws of the U.S., Canada and elsewhere.
Safety Information For your safety, please read the guidelines below carefully before you use your phone: Exposure to Radio Frequency Signals Max. SAR measurement EU: DCS1800: 0.259 mW/g. USA: GSM850: 0.871(head),1.44W/kg(body); PCS1900:0.724(head), 0.763W/kg(body). For your safety, please do not wear the phone in front of your chest.
These standards are based on extensive scientific review. For example, over 120 scientists, engineers and physicians from universities, government health agencies and industry reviewed the available body of research to develop the updated ANSI Standard. The design of your phone complies with these standards when used normally. Specific Operating Restrictions No metallic component allowed in body-worn accessories. Antenna Care Use only the supplied or approved replacement antenna.
All batteries can cause property damage, injury or burns if a conductive material such as jewelry, keys or beaded chains touches exposed terminals. The material may complete electrical circuit and become quite hot. To protect against such unwanted current drain, exercise care in handling any charged battery, particularly when placing it inside your pocket, purse or other container with metal objects.
• Should use the ear opposite the pacemaker to minimize the potential for interference. If you have any reason to suspect that the interference is taking place, turn your phone OFF immediately. Hearing Aids Some digital wireless phones may interfere with some hearing aids. In the event of such interference you may want to consult your hearing aid manufacturer to discuss alternatives.
Blasting Areas To avoid interfering with blasting operations, turn your phone OFF when in a “blasting area” or in area posted “TURN OFF TWO-WAY RADIO.” Obey all signs and instructions. Potentially Explosive Atmospheres Turn your phone OFF and do not remove the battery when in any area with a potentially explosive atmosphere and obey all signs and instructions. Sparks, from your battery, in such areas could cause an explosion or fire resulting in bodily injury or even death.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiated radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Table of Contents Safety Information ...........................................................i 1. Preparing Your Phone For Use................................... 1 Inserting Your SIM Card ..................................................... 1 Installing the Battery ............................................................ 2 Installing the Back Cover ..................................................... 2 Charging the Phone..............................................................
Phone Book......................................................................... 20 Adding Contacts to the Phone Book.....................................20 Finding Contacts in the Phone Book ....................................23 Last Missed, Dialed, and Received Calls............................ 25 Operations During a Call ................................................... 26 In-Call Menu ...................................................................... 27 Using the Silent Profile...............
Phone Book......................................................................... 58 Find .........................................................................................58 Add..........................................................................................58 Edit ..........................................................................................59 Copy ........................................................................................59 Delete ...............................
Tools.................................................................................... 68 Alarm ......................................................................................68 Auto Time Zone .....................................................................69 Calendar..................................................................................69 Shortcuts .................................................................................71 Calculator........................................
Preparing Your Phone For Use Inserting Your SIM Card Slide the entire SIM card into the slot in the direction of arrow shown on the compartment, with the metal contacts of the SIM card facing down and the cut corner at the top right. SIM card A SIM card can be easily damaged if its metal contacts become scratched. Therefore, take special care when holding or inserting it. If you wish to remove the SIM card, you must first press down the stay, then push the SIM card out of the slot.
Installing the Battery 1. Place the battery onto the back of the phone, with the battery's contacts facing downwards and the tab on its top edge in alignment with the holes in the battery compartment. 2. Push the battery against the top of the compartment and press it down to click it into the compartment. Do not remove the battery when the phone is on. Doing so could cause you to lose personal settings or data stored either on your SIM card or in the phone's memory.
Charging the Phone 1. Insert the charger connector into the charger socket at the bottom right of your phone. Make sure that the connector is inserted in the right direction. Charger socket Charger connector 2. Plug the charger into a power outlet. 3. Once the phone is fully charged, remove the charger from both the power outlet and the phone. • It takes approximately 4 hours to fully charge a battery. • When charging while the phone is turned off, an animated battery icon will be shown on the display.
Turning the Phone On 1. Long press to turn the phone on. The phone will display the welcome animation. • You can select and set a welcome animation, image, or message that will display when you turn on your phone, as well as the music that will be played. Go to Settings > Display > Welcome Message. For details, please refer to page 82. • If the welcoming music goes on too long, once the standby screen comes up, you can press to stop playback. 2. Enter your PIN code.
4. The standby screen will be displayed, as well as network signal strength and the name of the network operator. You can now use the phone. If the phone cannot detect the network, the on-screen signal strength meter will show no bars. If the phone links to a network that you are not authorized to use, the signal strength meter will show a level of zero. You will only be able to make emergency calls.
Getting to Know Your Phone Your Phone at a Glance The figure below shows the main parts of your phone: Front view Earpiece LCD display OK key Left soft key Dial/Answer key Right soft key Scroll key Power on/off key Alphanumeric keys Microphone 6 Getting to Know Your Phone
Hands-free headset jack
Standby Screen Status bar Name of network operator Time and date Wallpaper Soft key bar Press to enter the Phone Book Press to enter the main menu. Press to activate camera mode. • To set the current time and date, as well as the format to be shown, go to Settings > Date & Time. See page 78. • To set the wallpaper of the display, go to Settings > Display > Wallpaper. Alternatively, you can go to Media Center > Images or Media Center > Album. See page 82 and page 65.
Icons in the LCD display's Status Bar Icon Function Description Signal strength Signal strength of the network. The more bars indicated, the stronger the signal. Battery status Shows the current level of battery power. The more bars indicated, the more power that remains. Four bars: fully charged. No bars: immediate charging needed. When charging the phone, the icon will scroll through the bars until the battery is fully charged. GPRS network GPRS services have been activated on your SIM card.
Icon Function Description Silent In the standby screen, press and hold to activate the silent profile. See page 30, "Using the Silent Profile". Normal Shows that the Normal profile is in use. To set the operating mode, go to Settings > Profiles. See page 79. Meeting Shows that the Meeting profile is in use. Outdoors Shows that the Outdoors profile is in use. Personal Shows that the Personal profile is in use. Handsfree 10 Shows that the Handsfree profile is in use.
Using the Keys in the Standby Mode In this user manual, "long-press" means to press and hold down a key for about two seconds before release. "Press" means to press a key and release immediately. The chart below is meant only to introduce the commands accessible with keys when the phone is in standby mode. For information on other key commands available in other operating modes, see the pertinent sections in this user manual.
Key Commands and functions Left soft key • Press to access the Phone Book (when Names is shown). • Press to save the phone number keyed in from the standby screen to the Phone Book (when Save is shown). Right soft key • Press this key to use the camera function (when Camera is shown). • Press this key to delete entered digits one by one; longpress to delete all digits entered (when Clear is shown). • Long-press to turn the silent profile on or off. Scroll key • Press to enter the Quick Access menu.
Key Commands and functions Bluetooth Shortcut • Long-press to quickly connect to the previously connected bluetooth device. # key • Press to enter "#". • For extensions: After entering a phone number, longpress to enter a "P" and then enter the extension number. • Long press this key to lock the keypad. ~ Alphanumeric keys • Press to enter digits in a phone number. • Shortcut key: Long-press a key to immediately access the function, or dial the number, that it represents. See page 35, "Shortcuts".
Alphanumeric keys Key Digit Key Digit/Symbol/Function 1 7 2 8 3 9 4 0 5 * + (long-press) 6 # P(long-press after entering a phone number) Long-pressing an alphanumeric key will access the function it represents, or dial the number that has been assigned to it (shortcut function).
Menu Navigation When the phone is in standby mode, press menu. to bring up the main For details on how to use the various functions listed in the menu, see page 58, "Menus". Main menu Each icon represents a menu item. Use scroll key to move through the menu. The name of the menu item you highlight. Press to return to the idle screen. Sub-menu The name of the current menu. The highlighted row is the currently selected item. Press to enter the option shown here in the display.
Using Your Phone Making a Phone Call To make a phone call, check your phone is powered on showing the idle screen. Enter the desired number using the alphanumeric keys . Press to to dial your call. During a call, you can use the options. See page 27, "In-Call Menu". To modify a phone number that you have entered, press delete individual digits. Long-press (Clear) or press all digits entered and return to the standby screen. (Clear) to to delete Ending a Phone Call Press to end a call.
Answering a Phone Call When a call is received, your phone rings or vibrates, with the display showing the caller's number (if supported by your network vendor). If the caller is a contact stored in the Phone Book, the phone will show the name recorded in the Phone Book. • If the caller is a member of a caller group, the ring tone assigned to this group will sound. The display will show the image ID that is associated with this group as well, to help you identify the caller.
Making an Emergency Call To call emergency services, enter 112 (the international emergency to dial the call. You can make an number) and then press emergency call even if your phone is locked or cannot access your network, or there is no SIM card inserted, so long as you are within range of a network of the type supported by your phone. Dialing an Extension Number After you enter a telephone number, long-press . The phone display will show "P".
Listening to Voicemails When your voicemail inbox contains new messages, your network vendor will send you a text message to inform you of a new voicemail message (if the network vendor supports it, the voicemail icon be shown). There are two ways to access and listen to voicemail: will 1. When the phone is in standby mode, long press to directly dial the voicemail phone number and listen to your voicemail messages. 2. Go to Messages > Voicemail > Get Voicemail to dial the voicemail number.
Phone Book Adding Contacts to the Phone Book The Phone Book will have different formats and data headings depending on whether you have chosen to use a phone book stored on your SIM card or in your phone's memory. The phone book in your phone's memory can store up to 500 contacts. The capacity of a phone book on your SIM card depends on the particular service provided by your network vendor. 1. In the standby screen, enter the phone number you wish to store, and then press (Save).
Phone book entries on phone memory The contact's name. The contact's mobile phone number. The contact's home phone number. Used to assign a contact to a caller group. Press group, and then press to select a . Used to set a ring tone for the contact. When there is an incoming call from the contact, the phone will play this ring tone. A ring tone set in this field will replace the one associated with the contact's caller group, if any.
The contact's office address. The contact's company name. The contact's department name. The contact's job title. Used for notes about the contact. SIM Card Phone Book In the standby screen, press (Names) and then press (Option), select Add. The Add function will prompt you to select from To SIM or To Phone. Select To SIM to add a contact to your SIM card. The data fields provided by a SIM card phone book are as follows: The contact's name. The contact's mobile phone number.
Finding Contacts in the Phone Book In the standby mode, press (Names) to display contacts stored in the Phone Book. There are two ways to locate a specific contact in the Phone Book: • Press to scroll through the names (listed in alphabetical order) until the one you want is highlighted. • Press the alphanumeric key that corresponds to the first letter of the name you wish to locate the appropriate number of times. For instance, if the name starts with "K", you would press twice for "K".
currently using a phone book stored on your SIM card, you can copy the contact's data to the phone book stored in the phone's memory. The only information that can be copied from a phone book stored in the phone's memory to the one on your SIM card is a contact's name, phone number, and caller group. If a contact has more than one phone number associated with it, when that contact's data is copied from the phone to the SIM card's phone book, each phone number will be stored as separate contact.
Last Missed, Dialed, and Received Calls There are two ways you can view the last missed, dialed, and received calls on your phone, as well as information on their date and time: 1. If there have been any missed calls, the display will show a missed call message along with the number of calls that were missed. Press number. (View), and then press 2. In the standby mode, press to scroll to the desired phone to view the list of the most recent missed, dialed, and received calls. Press phone number.
Delete • Press time. All: Erase all the call records. to display the details on this call such as caller's name and Operations During a Call The following options marked with an asterisk (*) are dependent on network support and may require a subscription. Mute Press (Mute) to turn off the microphone. The person on the other end of the line will not be able to hear your voice. To restore the microphone's function, press (Unmute). Putting a Call on Hold* 1. When the only call is active: a. Press b.
Making a Second Call* Enter a phone number, or select one from the phone number or call record, and then press to dial it. The currently active call will automatically be placed on hold. However, if there is already one active call and another on hold, this action will fail. Call Waiting* If there is an incoming call while you are on the phone, a tone will sound through the earpiece and the display will show that a second call is currently waiting.
Phone Book Accesses data in the Phone Book. For details, see page 20, "Phone Book". Call Records Allows you to view information on missed, received, and dialed calls. See page 25, "Last Missed, Dialed, and Received Calls". Conference* Conference calls allow you to converse with more than one party at a time. The conference menu contains the following options: The maximum number of parties that can be accommodated during a conference call depends on the particular service provided by a network vendor.
Send DTMF When the phone is connected with other devices or services, you can send DTMF (Dual Tone Modulation Frequency) strings. DTMF strings are keypad tones that can be sent via the microphone as you dial another number. Your phone will emit the tones in order to communicate with answering machines, pagers, computerized telephone services, and so forth. Enter the phone number and then press to send the DTMF string. End Call End All Ends all calls, whether active or on hold.
Calculator Allows you to use the calculator. For information about the calculator, see page 71. Using the Silent Profile From the standby screen, you can long-press to activate the silent profile. Once it is activated, the phone will alert you to an incoming call by vibrating without ringing. • When you long-press to activate the silent profile, the phone will vibrate for one second. will appear in the LCD display's status bar when silent profile is activated.
Camera You can take pictures using the embedded camera in your phone, and then set pictures as wallpapers, or send them to others through MMS. 1. From the standby screen, press (Camera) to activate the camera mode. 2. Press (Option) to make the following settings: • Resolution: Sets the desired resolution.
Three filled stars indicate that High resolution is in use. Two filled stars indicate that Medium resolution is in use. One filled star indicates that Low resolution is in use. Scene is set to Automatic. Scene is set to Indoors. Scene is set to Outdoors. Scene is set to Night. Multi shots is set to On. Self Timer is set to On. Normal view; no zoom View is zoomed in 2x. View is zoomed in 4x. Appears when resolution is set to Low. Allows you to press to zoom in. Allows you to press to zoom out.
5. When you are ready to take a picture, press . Please note the following while shooting pictures • The external camera does not have a flash. Please take pictures in a well-lit area. • When taking pictures, do not block or touch the camera lens on the back of the phone. • Always photograph your object with the source of light behind you. • Do not shake the phone when taking pictures. • Please be sure that the lens is perfectly clean before taking pictures.
• Details: Shows the information such as name, date, resolution, and file size.
Shortcuts You can use the Shortcuts menu to assign 7 alphanumeric keys as shortcuts to commonly used functions or frequently dialed numbers. Key is set to voicemail dialing and key is set to bluetooth connection by default, and they are not allowed to be changed. From the standby screen, press to enter the Shortcuts menu. The numbers 3 to 9 displayed on the screen represent the corresponding 7 alphanumeric keys on the phone.
6. To cancel a shortcut key and restore the key's original function, scroll to the shortcut key that you want to cancel, and then press (Option). Select Delete to cancel the shortcut. Using Shortcuts There are two ways to use shortcuts: 1. From the standby screen, long-press an alphanumeric key to access its assigned shortcut. 2. From the standby screen, press You can then: to enter the Shortcuts menu. a. Scroll to move the selection box to the icon corresponding to the desired key.
Messages Your phone supports various messaging services including SMS (Short Messaging Service) and MMS (Multimedia Messaging service). SMS allows you to insert simple animations and ring tones into your short messages, while MMS enables you to send pictures, colored images and music through your phone. You must have a subscription that supports MMS. Please contact your service provider for details. From the standby screen, press menu.
Text: This is a list of templates that can be used instead of entering all the characters individually. You can use the factory default templates or templates of your own that you previously saved to the list. To create your own quick message templates, go the menu Messages > SMS > Templates. See page 41. Image: You can select an animation from the image library to insert into your message. Press to select image you wish to insert, press once to preview and then press again to insert the image.
• Send: Press to enter a recipient's phone number editor. You may enter a phone number or press (Browse) to select recipients from the list of contacts in the Phone Book. Follow the steps below: a. Press to scroll to the name of contact, and then press to select it. Repeat the step to select multiple contacts. b. Press (Done) to return to the recipient's phone number editor. c. Press to send. When the phone is sending a message, "Sending... x/x" will appear on the screen.
Call Sender: Uses the number from which the message was sent to call the sender. Chat: Starts a chat session with the sender. Forward: Forward the massage to others and you may edit the content beforehand. Save: Allows you to save the following content: • Save the phone number from which the message was sent (the number shown on the display in the "Sender Info" item) to the Phone Book. • Save the phone number displayed in the message's contents. (the option for a directly displayed number).
Managing Outbox Go to MMS > Outbox. This option preserves a backup copy of messages that you previously sent. Scroll to the massage and then press (Option) to delete, resend or forward the message. Select Delete All to erase all messages. Managing Drafts Go to SMS > Drafts. This option allows you to preserve message drafts that you have saved. Scroll to the desired message record, press (Option) to delete the draft or to delete all, or press message.
Settings Save Msg. to Here you can determine whether a new message will be saved to the phone's memory or to your SIM card's memory. Service Center No. This feature allows you to save the message center's phone number for sending your messages. The messages that you send are sent to recipients through this message center. Enter the message number provided by the network vendor. After you are finished, press to confirm.
Validity Period This sets the duration that an undeliverable SMS message that you send can be stored at the message center. During this period, the message center will continue to attempt to deliver the message to the designated number. Message Type You can request that your network operator convert your text messages to different types. Status Report After activating this function, the network vendor will report to you when a message has been delivered.
MMS Before you start to use MMS, you have to subscribe to both GPRS and MMS services provided by your operator. Then you have to adjust MMS settings in your phone to be able to use MMS. Because MMS uses your operator's MMS server on a GPRS network to send messages to phones, you need to adjust the following settings correctly in order to use MMS: Go to Oper.Service > WAP Service > WAP Setting to create a new WAP profile for your network settings.
c. Press • Subject: press to send. to enter the text for the subject. • Content: press to enter the slide editor. See below for details on the options of editing the content. • Cc: You can send the message as a carbon copy to others. • Bcc: You can send the message as a confidential carbon copy to others. • Priority: press message.
the highlighted photo. Press will display the next or previous photo. Press again to save the photo into the slide. Templates: Insert the default MMS templates into your messages. Those templates contain images and text. You can customize those by inserting more objects you like. Image: You can select a image saved in the image library to insert into a MMS slide. Press (Save) to immediately insert the highlighted image into current slide, or press to view the highlighted image.
• Slide Duration: To set the duration of each slide during playing. For example, 30 means each slide will played for 30 seconds. Each slide allows only one image and one audio file. If you try to insert a second image or audio, an Out of range message will pop up. 3. After you finish all slides for a MMS message, press and choose from the following options: (Option) • Send: Send the message immediately. • Save to Draft: Store the message in Outbox. • Preview: Preview the message.
Cleaning Up Messages Go to MMS > Cleanup. This option allows you to cleanup part of or all of the messages. The options for cleanup includes All, Inbox, All Read, Outbox, and Drafts. Settings Before you start to use MMS, go to MMS > Settings to adjust the following settings: Filter Your phone will reject all MMS messages from the senders listed here. Expiry Sets the length of time your outgoing MMS message stays on the server before it reaches the recipient successfully.
Deferred Download After you activate this function, the phone will only download the information associated with the sender when it receives an MMS message. You can then decide whether to download this message's content after you have read the information related to the sender. Delivery Report Asks the recipient to return a confirmation after receiving your MMS message. Read Report Asks the recipient to return a confirmation after reading your message.
your nickname followed by your message as “nickname> message”. (Option) and then d.When the chat message is sent, press choose Send to enter another message. The message will automatically be sent to the same recipient. Repeat the same process to send more messages to the same person. 2. Alternatively, to start a chat session, you can select a message from Inbox, press (Option) and then choose Chat. Select a chat partner from the Nickname list and then press message and press to a chat. .
Leaving a chat session If you want to leave a chat session, press (back) or . This will take you back to the SMS Chat menu. You phone will keep the records of the last chat session. To resume the previous chat session, scroll to select Previous Chat. If you want to start a new chat, go to SMS Chat > New Chat. When you are interrupted by an incoming call during a chat session 1. Answer the call. Upon ending the call, the display returns to the idle mode.
Cell Broadcast Cell broadcast messages are general messages that your network operator broadcasts to all phones within a particular area. These messages are broadcast in numbered channels. For example, channel 030 might be for local weather, 060 for traffic reports, 080 for information about local hospitals, taxis, pharmacies, and so forth. You can receive cell broadcast messages that your network operator broadcasts, and select your preferred topics and languages.
Memory Status Displays the amount of remaining available memory, including pictures, animations and ring tones stored on the phone.
Input Modes When an editing screen is displayed, the current text input mode is indicated in the upper right corner of the screen. The phone has the following input modes. Long-press lower case. to switch between upper and iTap (predictive input mode) for uppercase letters. iTap (predictive input mode) for lowercase letters. Uppercase letters input mode. Lowercase letters input mode. Numeric input mode. Changing the Text Input Mode Press table. to change the input mode.
Predictive Input Mode (iTap) How to use iTap • Press each key associated with the letter you want to enter only once. The letters you have entered appear on the display. The candidate words will change with each key you press. • If the first highlited candidate word is the wrong word, scroll to view other candidate words and locate the desired word. • Once the correct word is located, press to enter this word. • While entering text, use the joystick to move the cursor.
Letter Input Mode (ABC) How to use the letter input mode • You must press the key corresponding to the desired letter the correct number of times in order to enter the letter you want. Display letters for entry according to the order shown on each key. Pressing a key once will display the first letter listed on the key, while pressing it twice will display the second letter, and so on.
Using the Bluetooth Your phone features the bluetooth function that allows you to have a wireless connection between your mobile phone and your bluetooth headset. Establishing Connection with Your Bluetooth Headset 1. Go to Tools > Bluetooth > Turn On to turn on the Bluetooth. The appears on the idle screen. Bluetooth icon To quickly connect to the previously connected bluetooth device, long-press . 2. You will be asked to search and to add Bluetooth devices, press (Yes) to begin searching.
Menus The phone's menus provide various features. The main menu consists of 9 icons. Each icon represents a particular menu item, which is used to access related sub-menus. For information about navigating menus, see page 15, "Menu Navigation". Phone Book This menu provides various functions for managing the Phone Book, including the ability to add, locate, and copy contact data; add contacts to a caller group; and so forth. Find Used to locate a contact in the Phone Book.
Edit After selecting a particular contact, you can follow the procedure described on page 20 for editing the data for this contact. Copy If you are using the phone book stored in the phone's memory, you can copy contact data to the SIM card's phone book, and vice versa. You can select a contact to copy from one phone book to the other, and copy all contacts in one phone book to the other by choosing the option All Phone to SIM (All SIM to Phone). Delete Deletes a contact from the Phone Book.
Business Card You can use this option to enter your own business card information. The data fields are as follows: Your name. Your mobile phone number. Your e-mail address. Your company's address. Your job title. Press to scroll to the data field you wish to edit, and then press to begin entering the text. After you are finished entering the data, press to return to the previous screen.
Messages For a description of the features available in the messages menu, see page 37, "Messages". Call Records Your network operator must support this feature in order for you to be able to use it. This menu includes a list of your missed calls, dialed calls, and received calls. Call costs and time are also recorded. Missed Shows your most recent missed calls. Press to scroll to the missed call that you wish to select. You can now choose to view, edit, or delete the number for the missed call.
Cleanup All Deletes all call records. Duration This feature is only accessible if supported by your network operator. Last Shows the duration of the last call. All Shows the total time for all calls. Received Shows the total time for all received calls. Dialed Shows the total time for all dialed calls. Reset Clears all call time records. You must enter your PIN2 code in order to zero call times. What is a PIN2 code? • The PIN2 is the second PIN code.
Cost Last Shows the cost of your last call. Requires the support of the network operator. All Shows the total cost of all calls. Requires the support of the network operator. Reset Clears all call cost records. Requires entry of the PIN2 code. Cost Limit Shows the current limit set for total call costs. Set Allows you to first enter the unit price and a currency for calculating call costs. Requires entry of the PIN2 code.
Games Your phone provides a number of exciting games that you can use to entertain yourself when you have a spare moment. Games Cherry Boy This game contains five levels and in each level the player has three lives. To pass one level you must collect all the cherries before time is up, or you must obtain the key to the next level. If you bump into a monkey, you lose one life. Eda Mouse This game contains eight levels and to pass each level player has to eliminate the fruit to a certain amount.
Camera The digital camera function you access through the main menu is the (Camera) from the standby screen. For details same as pressing on how to use the camera, see page 31, "Camera". Media Center Album Album stores picture you have taken. When you enter the menu, the photos will be displayed as thumbnails and details of each photo will be shown. 1. Scroll to the desired picture. 2. Press to display the picture in full screen. Scroll up or down to display the next or previous picture. 3.
Delete All: Deletes all the photos in the album. Shows the name of the photo, the date it was taken, and the size of the image. Details: Image This image library stores the phone's default images, as well as images received in messages, downloaded through WAP services or using multimedia communications tools. You may set the image as caller ID image, or send the image in a short message.
• Rename: Allows you to give a new name to the ring tone. The phone's default ring tones cannot be renamed, so they do not present this option. • Delete: Deletes user-defined ring tones. The phone's default ring tones cannot be deleted. Only userdefined ring tones provide this option. • Send: Sends the ring tone in a message. For information about messaging features, see page 37, "Messages".
Tools Alarm If you activate the Alarm Clock feature, when the specified date and time arrive, the phone will sound the alarm, even if your phone is turned off. 1. Select the alarm you wish to set and press . 2. The status of the alarm will appear, press to set the alarm status on or off. 3. After your alarm is turned on, setting options appear as shown in the chart below: Switch the alarm on or off. Enter the time when an alarm will go off.
4. Lastly, you must press (Save)to save all your current Alarm settings. After completing Alarm settings, standby screen's status bar. will appear in the Auto Time Zone If during travel, you move between time zones, the phone will automatically adjust the time displayed on the screen based on the time zone prompts provided by the local network operator so that you always have access to accurate local time.
2. In the Calendar screen, press to move the red box to the date where you wish create a memo. You can also press and select the Go to Today option. (Option) 3. When the red box is highlighting the desired date, press (Option) and select the Add option to open the memo editor. 4. In the memo editor screen, scroll to the data field you wish to edit, and then press , or press alphanumeric keys to begin entering data. You can enter data in these fields: Enter the subject for the event.
Record any notes about the event. 5. After completing entry of data in each of the fields, you must press (Save) to save the memo to that date. Shortcuts For a description of the features accessible through the Shortcuts menu, see page 35, "Shortcuts". Calculator Allows you to use the phone as a calculator. Use mathematical operations shown on the screen. Press decimal point. to perform the to enter a You can enter numbers up to a maximum of 8 digits in length.
same line as the bottom currency on the screen. Use the to view the calculation result. The calculation can provide precision up to two decimal places. The exchange rate field can accommodate a maximum of five digits (including decimal digits). 3. After returning to the Currency Converter screen, you can select one of the currencies and then enter an amount that you wish to convert into the other currency. You can enter amounts up to six digits long. 4.
Oper. Service Your phone includes a built-in WAP browser, allowing you to use the phone for mobile Internet connectivity. You can browse the online services offered by the network operator or ISP, such as information on financial news, sports, travel, and entertainment. To use the phone to get online, necessary WAP and GPRS settings must be made in this menu.
Browsing a webpage Referring to the soft key commands at the bottom of the screen, press and to perform needed tasks while browsing a webpage. Press to scroll up or down a webpage. For details on browsing a webpage, inquire with the network operator providing WAP services. How to close the browser and end the online session While online, press or long-press . If you are already viewing a WAP webpage, long-press or from the browser's menu select Exit.
WAP Settings Allows you to make settings for the WAP servers of six different network operators, and select the server that you would like to use when connecting to the Internet. By scrolling to a particular group of WAP server settings that you wish to modify, and then pressing (Option), you can create a new group of settings, edit the settings, or delete the settings. WAP server settings include the fields listed below. Press (Edit) to edit the setting in each field.
CSD: Use only the dialup network. A dialup network is a GSM Circuit Switch Data Service (CSD for short). Using a dialup network can be likened to using a home computer's modem, in that before connecting to the Internet a number must be dialed. As for GPRS, it like the LANs used at company, where users do not need to dial a number to access the network. Regular GSM users who are not using a GPRS network system can only have a dialup connection to the Internet.
Baud Rate: The default value is 9600, which is the standard speed for data connections with a GSM mobile phone. Auth Type: This is information needed for telecommunications protocol authentication. Clear Cache Clears webpage content that the browser temporarily stores in memory. Clear URLs Clears URL strings that the browser temporarily stores in memory. STK Your network operator provides this STK (SIM Tool Kit) menu.
Settings Date & Time Used to set the time and date, as well as the format in which the time and date will be displayed on the startup screen. Press settings. to save the Date Enter the date using appropriate number keys. Time Enter time using appropriate number keys. Format This option is used to decide the format in which the time and date will appear in the standby screen. Auto Power On/Off Designates a time for the phone to be automatically turned on or off.
Power Off When you see Status Off displays on the screen, press and choose the On option, scroll to Time and then enter a time you wish the phone to be auto turned off. Profiles A profile is a group of settings that determine whether the phone will alert you to incoming calls through a ring tone or a vibrating alert, and how ring tones in general are used on the phone. These settings allow the phone's operation to best suit the environment you are in. 1.
Outdoors The options in this profile have been preset to suit an outdoor activity (for example, use of the highest ring tone volume, activation of both ring tone and vibrating alerts, and use of keypad tones). Once this profile is activated, the LCD display's status bar will show the . Handsfree This profile is only active when a hands-free kit is attached to the phone. Once this profile is activated, the LCD display's status bar will show the icon.
• Ring Only: When there is an incoming call, the phone will use a ring tone but no vibrating alert. • Vibrate Only: When there is an incoming call, the phone will use a vibrating alert but no ring tone. • Ring & Vibrate: When there is an incoming call, the phone will use both a vibrating alert and a ring tone. • Vibrate then Ring: When there is an incoming call, the phone will first use a vibrating alert and then a ring tone. Call Ring Your phone includes various types of ring tone melodies.
• Any Key: Allows any key except to be used to answer an incoming call. In this mode, is used to reject an incoming call, and not to answer. • Automatic: If the Automatic answer mode is activated, the phone will ring for five seconds, and then the incoming call will be automatically answered (only the Handsfree profile allows this setting). Rename Allows you to provide a new name for the profile (only available for the Personal profile).
(Edit) to enter the image library. Only the • Image: Press image selected in this option will be displayed when the phone is turned on. After selecting an image, you will need to select the desired music to be played when the phone is turned on. Select Silent if you do not wish any music to be played. • Photo: Follow the same steps as selecting images. • Text: Press (Edit) to input the text. Only the text entered in this option will be displayed when the phone is turned on.
Audio This menu allows you to set various sounds that the phone uses. Some of the options provided in this menu and the Profiles menu are identical (for example, Call Ring). Therefore the particular setting that the phone uses will depend on which menu you last used to make the setting. Call Settings Answer Mode • Any Key: Allows any key except to be used to answer an incoming call. In this mode, is used to reject an incoming call, and not to answer.
Off: Your phone number will not be shown on the recipient's phone. If this feature is turned off, you may not be able to make phone calls in certain countries, such as Singapore and China. Preset: Whether your phone number will be displayed on a recipient's phone will be determined by the default set by the network operator. Call Divert Requires the support of the network operator. Forward All Forwards all incoming calls to a designated phone number or voicemail inbox.
Call Barring You can request that your network operator block the dialing or receiving of certain calls. The call barring services below require the support of your network operator. To activate or cancel any of the options below, you must enter the network password provided by the network operator. All Outgoing Blocks dialing of any calls from the phone. Intl. Out If this option is activated, no international calls can be made with your phone. Intl.
Call Waiting If there is an incoming call when you are in the middle of another call, the screen will display the number of the incoming call and call waiting message to alert you. You can activate, cancel, or view the status of this feature from this menu. You must apply to the network operator for the call waiting service in order to use this feature. Auto Redial If there is no answer at a number you have dialed, the phone will automatically redial.
Active Line This feature allows you to use two different phone numbers on one phone. You can designate one number for dialing calls, while accepting incoming calls dialed to both numbers without needing to use two phones. Select either Line 1 or Line 2. The number you select ( or ) will appear on the standby screen. This feature requires the support of the network operator. User Group User Group Used to create a closed group of callers based on a service provided by the network operator.
your regular network in your home country or when abroad, you can manually select the local network system. Your network operator must be able to support network selection in order for you to use this feature. Network Mode You can choose whether the network selection mode that the phone will use when it is turned on is automatic or manual. Automatic: If this option is selected, when outside the coverage of your regular network, the phone will automatically search for usable networks.
Service Tone Used to set whether the phone will sound when it detects an available network. Security You can use a PIN code, phone password, and SIM card lock authentication to prevent unauthorized use of the phone. PIN Code A PIN (Personal Identification Number) code is a password provided by a network operator. When PIN code authentication is activated, it will prevent unauthorized use of the SIM card.
Phone Lock Once the phone lock is activated, you will be required to enter the phone code when the phone is turned on. You must enter the correct code to unlock it (the default phone code is 1234). When the phone is locked, you will only be able to make emergency calls. SIM Lock When activating the SIM Lock, you must enter the SIM Lock password (the default SIM Lock password is 1234). The password must be between 4 and 8 digits.
Restore Restores all of the phone's settings to their factory defaults.
Troubleshooting If you encounter problems while using the phone, or if it performs erratically, you can consult the information in the chart below. If your particular problem cannot be resolved using the information in the chart, contact the dealer where you purchased the phone. Problem Possible cause Solution • The network signal is too Move to a location where the weak at your current network signal can location — for example, in properly received.
Problem Possible cause • The standby time is related to your network operator's system configuration. The same phone used with different network operators' systems will not provide exactly the same length of standby time. Shortened standby time • The battery is depleted. In Use a new battery. high-temperature environments, battery life will be shortened. • If you are not able to connect to the network, the phone will continue to send out signals as it attempts to locate a base station.
Problem Possible cause • SIM card invalid. Unable to connect to the network. • You are not within the Check the service area with network's service area. • Poor signal. You cannot answer incoming calls. Solution Contact your network operator. your network operator. Move to an open space, or if you are inside a building, move closer to a window. • You have activated the Go to Settings > Call Call Barring feature. Settings > Call Barring, and then select Cancel All.
Problem Unable to enter information into the Phone Book. Unable to select certain features. 96 Possible cause • The Phone Book's memory is already full. Solution Delete unnecessary data from the Phone Book. • Your network operator Contact your network does not support these operator. features, or you have not applied for services that provide these features.