User's Manual

Setup32
© \\Itl.eu\cottbus\Projekte_30\BenQ_Mobile\AF51_Quail\output\SUG\AF51_QUAIL_1_FCC_us-
left page (32) of AF51 DTC FCC us-en,
Template: X75, Version 2.1; VAR Language: am; VAR issue date: 050711
Set up call divert (example)
The most common condition for call
divert is, for example:
• Unanswered
Includes the conditions Not reachable,
No reply, Busy, see p. 32.
Unanswered
¢ D ¢ Set ¢
J
(enter
the phone number, to which the call
should be diverted)
¢ §OK§.
After a short pause, the setting is
confirmed by the network.
• All calls
All calls are diverted.
n is shown in the
top line of the display in standby mode.
Other possibilities for divert:
Not reachable, No reply, Busy
• Status check
You can check the current divert status
for all conditions.
After a short pause, the current situation
is transmitted by the network and
displayed.
p Condition set.
o Not set.
s Display if status is unknown
(e.g. with a new SIM card).
• Clear all
All set diverts are cleared.
Open clamshell
Incoming calls can be accepted by
opening the clamshell.
Minute beep
During a call, you will hear a beep after
each minute as a reminder of the time
elapsed. The recipient does not hear
this beep.
Clock
§Menu§ ¢ m ¢ Clock ¢ Select function.
Time/date
The clock must be set to the right time
once at start-up.
§Change§ ¢ Enter the date first, then
the time.
Time zones
Set the time zone for your area.
Time format
Select 24h or 12h.
Date format
DD.MM.YYYY or MM/DD/YYYY
Buddhist year
Switch to the Buddhist year (not on all
phone models).
Show clock
Activate/deactivate time display in
stand-by mode.
Automatic switch off
The phone switches off each day at the
set time.
Activate:
§Time§ ¢ J Enter time (24-hour-clock)
¢ §OK§.
Deactivate:
§Manual§ ¢ §OK§